Illustration of 33 Kongmingsuo

1. The illustrations of 33 pieces of kongming lock are as follows:

2. First, take out the longest piece and arrange it as shown in the above figure;

3. Take the longest component and cross it with the previous component;

4. combine the last long part with the cross structure into the vertical three-dimensional structure as shown below;

5. When the three-dimensional structure of the center is completed, take one piece according to the length specifications of the remaining parts to be placed in the three-dimensional structure.

6. Assemble the prepared three parts with different lengths from the bottom of the three-dimensional structure in order from short to long.

7. Take out all kinds of components as shown in the figure below for assembly.

8. Assemble the prepared parts from the left and right sides of the cross in the three-dimensional structure respectively.

9. At this time, from the center of the three-dimensional structure, the lower half has been assembled, and then three parts with different lengths are prepared as shown in the figure below.

1. Assemble the prepared three components as shown in the figure below, and assemble them from the bottom to the top of the cross in the order of first long and then short, so as to achieve the effect as shown in the figure above.

11. It is more important here. The whole pineapple lock should be rotated at a certain angle, and the effect after rotation is shown in the figure below. Please handle it carefully and don't fall apart.

12. After the rotation is successful, move the components on the right side of the highest column to the right in turn until a column is empty, as shown in the following figure.

13. After the space is reserved, prepare the parts corresponding to the following figure to complete the final assembly.

14. The effect after assembly is as follows:

15. Insert the prepared parts into the corresponding positions one by one as shown in the above figure.

16. At this point, all the components have been successfully assembled in the central structure, and it needs to be fine-tuned to be assembled.

17. Move the columns on the right side of the central column to the left respectively to restore, and 33 kongming locks will be assembled.