Traditional Culture Encyclopedia - Traditional festivals - How much is the construction technology of one asphalt tile?

How much is the construction technology of one asphalt tile?

Tiles are very common in our life, and there are many kinds of tiles, among which asphalt tiles are the most special tiles. Asphalt shingles are also called glass fiber shingles, linoleum shingles and glass fiber tire asphalt shingles. Asphalt shingles are widely used in the construction industry, and asphalt has various shapes and wide uses. Insulation, heat preservation. The roof is light, safe and reliable. Simple construction and low comprehensive cost. Durable, don't worry about breakage. Rich in color, beautiful and environmentally friendly, waterproof and corrosion resistant. Eighth, wind resistance, dust prevention and self-cleaning are all good. Then Bian Xiao will tell you something about asphalt shingles, hoping to help you.

The price of asphalt shingles

Asphalt shingles are also called glass fiber shingles, linoleum shingles and glass fiber tire asphalt shingles. Asphalt shingle is a new high-tech waterproof building material, and it is also a new roofing material applied to waterproof building roofs.

Guizhou Anshun Kesman single-layer asphalt tile? Chengdu Li: ¥26/ m2 (price source network, for reference only)

Asphalt tile, owner of Hebei House, factory outlet of asphalt tile: RMB ¥30/ m2 (price source network, for reference only).

Glass fiber tile and glass fiber asphalt are made by individual: ¥30/ m2 (price source network, for reference only).

Yuexing YXJ- 12 1 colored glass fiber tire asphalt tile: RMB ¥28/ m2 (price source network, for reference only).

Glass fiber tire asphalt tile? Glass fiber tile? Linoleum tile? Drainage pipe: ¥25/ m2 (price source network, for reference only)

Asphalt tile construction technology

The first asphalt tile

Laying asphalt shingles in sequence. Make sure that the edge of the first asphalt shingle is aligned with the edge of the first asphalt shingle along the gable edge and cornice. Asphalt shingles should be closely connected, but there should be no squeezing between them. Fix the asphalt shingles according to the above fixing method. The laying of the first floor is the most critical. In the process of laying, constantly check whether the asphalt tile is aligned with the horizontal line to ensure that the layer is laid straight. The rebound straight line aligned with the side of the first asphalt brick is used to ensure the alignment of decorative joints.

Second layer asphalt tile

The side of the first asphalt tile on the second floor should be staggered by half a leaf from the side of the asphalt tile on the previous floor. Next, lay the whole asphalt tile in turn. The bottom edge of the second layer of asphalt tile should be flush with the top of the decorative joint of the first layer of asphalt tile, so that the previously paved asphalt tile will be exposed. Use a horizontal line to make the bottom edge of the asphalt tile parallel to the cornice, and fix the asphalt tile firmly with nails.

The third asphalt shingle and continuation layer

The first asphalt shingle of the third layer should cut off the whole blade, which is staggered with the first asphalt shingle of the second layer, and the bottom edge of the asphalt shingle should be flush with the top of the decorative joint of the second layer. Then come down and put it down in turn with a whole asphalt tile.

Four: Yin angle

The asphalt shingles on the intersecting roofs can be laid along the gutter direction on both roofs at the same time or separately on each reverse side, both of which are laid at the center line of the gutter 75 mm After the asphalt shingles on the two roofs are laid, the asphalt shingles on the gutter are laid again. No matter what method is adopted, the first layer of asphalt shingles should be laid along the eaves of a roof, and it should cross the kingdom of heaven, so that the last layer of asphalt shingles of this layer extends to the adjacent roof for at least 300mm, and then the first layer of asphalt shingles should be laid along the eaves of the adjacent roof. At the same time, they should extend to the gutter and be connected with the asphalt shingles laid before, and they should be woven together as shown in the figure, and the asphalt shingles should be pressed in the gutter to fix the asphalt.

Five: Ridge tile

Adjust the last few layers of roof tiles to roof tile coverage. Ridge tiles are made of single-layer tiles cut along the incision.

Asphalt shingles are still very commonly used in our lives, such as home roof decoration and so on. The characteristics of asphalt shingles are also very obvious. Most commonly, they can be applied to roofs with a slope of 5-90 degrees and roofs of any shape. But not for flat roofs. Therefore, when using asphalt shingles, you must choose according to your actual situation. Asphalt shingles are also called glass fiber tire asphalt shingles. With the development of asphalt shingles, they become lighter and more colorful. But when you buy asphalt tiles, you should choose according to the following three aspects: asphalt tile carcass, ingredients and covering materials.