Electromagnetic flowmeter and the difference between traditional flowmeter?

Electromagnetic flowmeter for one of the traditional flowmeter, electromagnetic flowmeter and other flowmeter differences are:

①Electromagnetic flowmeter transmitter structure is simple, no moving parts, there is no obstacle to the flow of fluid throttling parts, so when the fluid passes through will not cause any additional pressure loss, at the same time it will not cause such as wear and tear, clogging and so on, especially suitable for measuring the liquid-solid two-phase fluids with It is especially suitable for measuring slurry with solid particles, sewage and other liquid-solid two-phase fluids, as well as a variety of viscous slurry. Similarly, because of its structure without moving parts, it can be attached to a corrosion-resistant insulating liner and select corrosion-resistant materials made of electrodes, to play a very good corrosion resistance, so that it can be used for a variety of corrosive media measurement.

② Electromagnetic flow meter is a volume flow measurement instrument, in the measurement process, it is not subject to the measured medium temperature, viscosity, density and conductivity. Viscosity, density and conductivity (within a certain range) of the impact. Therefore, the electromagnetic flowmeter only after the water calibration, can be used to measure the flow of other conductive liquids, without additional corrections.

3 electromagnetic flowmeter range is very wide, the same electromagnetic flowmeter range ratio of up to 1:100. In addition, the electromagnetic flowmeter is only proportional to the average flow rate of the measured medium, and with the axisymmetric distribution of the flow state (laminar or turbulent) is not relevant.

4 electromagnetic flowmeter without mechanical inertia, responsive, can measure instantaneous pulsating flow, and good linearity. Therefore, the measured signal can be directly converted to standard signal output linearly with the converter, can be on-site instructions, can also be transmitted over long distances.

For more detailed information, please contact Mack Sensor Co!