What material is used for the indoor partition wall?

Question 1: What to use as a partition wall for home decoration depends first on the structure of your house. Whatever the structure, it is best to use lightweight materials. Generally, light steel gypsum board is used as partition wall. If you want to hang heavy objects on the wall, you should pay attention to reinforcement. Now there is another material on the market called gypsum brick, which is also used as partition wall and belongs to environmental protection products. There is also a color steel structure. The cost may be higher (that is, the materials used in the prefabricated houses).

Question 2: What material is used for the indoor partition wall? Indoor partition walls are generally made of light steel keel and gypsum board, 100 light steel keel is used as vertical dragon, 38 light steel keel is used as hole, and the middle space with sound insulation requirements is filled with sound insulation cotton. Both sides of the wall are covered with gypsum boards. If you need to hang heavy objects (air conditioners, murals, televisions, etc.). In the future, you can cover them with a layer of joinery board and then use gypsum board. Finally, repair the seam, scrape off the dust and brush the latex paint.

Question 3: What material is better for the partition of the room? Gypsum boards rot when touched? Cement board is better and waterproof. Heat preservation and sound insulation can add sound insulation and heat insulation materials in the middle of the partition wall. Cement board is more expensive than gypsum board, probably around 30 yuan. I haven't bought it for a long time, I forgot. Sound insulation materials are also cheap, but your consumption is small and the price is relatively high. Moreover, the sound transmission speed and effect of iron plate are definitely more obvious than that of wall.

Question 4: What material is used for the indoor partition wall? What are the main partitions? Cement boards are used in kitchens and bathrooms. Moisture-proof gypsum boards are generally used in basements. Use ordinary gypsum board when the appearance needs oiler. Remember, if you use them in the bedroom, put soundproof cotton in the partition.

Question 5: What material is used to make partition gypsum board for decoration? Only 8 cm of foam was added to the board.

Question 6: What material is good for the indoor partition of your house? If you live by yourself, partition it with aerated bricks. My home has just been renovated, and this is what I use. I feel that aerated brick partition is quite popular now.

You can go to Jiayuan partition company, which is the leading brand of aerated brick partition industry, and I use their company.

Question 7: What material is used for the indoor partition wall? Sound insulation board: JMG-D24 low-frequency sound insulation board, JMG-M 16 cork damping board, JMG-L 16 composite damping board, using E 1 environmental protection and fire prevention A 1, with no radiation and pollution, and good weather resistance.

Sound insulation blanket: JMG-G/W2 polymer damping sound insulation blanket is made by high-tech process reaction ratio; Environmental protection and no odor; It has a good suppression effect on low-frequency and high-frequency sounds, and can effectively suppress the spread of various vibrations; The materials can be cut at will, and the construction is very convenient.

JMP fiber spraying: it is a brand-new sound-absorbing, sound-insulating, heat-insulating and heat-insulating decorative material, which is made of natural recycled fibers and processed by the most advanced technology. Its color is grayish white, which has the advantages of fire prevention, energy saving, sound wave reduction, light weight and strong adhesion.

Sound absorption board: The sound absorption performance of polyester fiber sound absorption board is similar to other porous materials. The sound absorption coefficient increases with the increase of frequency, and the sound absorption coefficient at high frequency is very large. Leaving a cavity on its back as a spatial sound absorber can greatly improve the sound absorption performance of the material.

Shock absorber: It is made of load-bearing metal frame, high damping rubber, short-stroke damping spring and load-bearing screw through a unique process.

Damping hook: the wall shock absorber is a necessary part for ceiling sound insulation, and its unique damping rubber block can cut off the transmission of sound bridge, especially in all subwoofers in entertainment venues. Otherwise, no matter how many sound insulation materials there are, it is the most important facility in sound insulation engineering, and it can also be used as a pipe hanger in equipment rooms such as water pump rooms to suppress the spread of low-frequency sound with remarkable effect.

These Jumao sound insulation materials have good effects, and the price ranges from tens to hundreds. You can make a field trip and decide which one is the best.

Question 8: What kind of brick should be used for indoor partition? Generally, it is porous brick, which is heat and sound insulation and firm. Good wall thickness is only 15CM.

Question 9: What are the practices, materials and characteristics of indoor partition walls? First, red brick masonry is strong and cheap. It's not easy to change after doing it.

Second, the wooden keel gypsum board partition wall is convenient to construct, but the sound insulation effect is poor. Wooden keel is not allowed to be painted with fireproof paint before it can be used.

Third, the light steel keel gypsum board partition wall is more difficult to construct than the wooden keel, but it meets the fire protection requirements, especially in public places.