Jewelry processing process 5 process to create the perfect jewelry

The shiny jewelry we see in the jewelry store, and a variety of shapes, styles, are after a lot of procedures of processing, design, production, and polishing and so on. So jewelry processing process is how, the following and I came to see the 5 process to create the perfect jewelry it.

Jewelry processing process:

First, the design drawings

Design jewelry designers will be sketched on paper to create a new work of art, but also with pencil, and gouache to complete the design draft. This process takes at least a few days or half a month, and if it takes a little longer, it may take a few months for a style to be finalized.

Second, hand-carved wax plate

Craftsmen will refer to the design drawings hand-carved wax plate, which is the jewelry manufacturing process is more demanding a process, the wax plate must be manufactured to be polished without traces of each part of the structure should be reasonable, the location of the inlaid stones size should be accurate. This is a very delicate work, with the development of science and technology, now the handmade version of the jewelry is less and less, most of them are using computer CAD software drawing.

Jewelry Processing Process:

Third, pouring mold

In the past, the production of the ring will use the lost wax casting method, that is, the wax mold made into a ring shape. If mass production is needed, the wax plate is made into a silver plate and pressed into a film, and then the wax mold is mass-produced. If it is customized, it will be simpler, directly into the process of inverted mold, first planting the wax tree. The steps are as follows:

Planting the wax tree - filling the plaster - baking the plaster - pouring the casting - blowing and cleaning the plaster mold - shearing the casting.

Fourth, mold execution

The execution of the mold is all done by hand, with a special calender knife in the surface of the jewelry back and forth push, this process requires a certain technology and techniques.

V. Matching stones

According to the design of the jewelry, the diamonds or gemstones are sorted out by hand, picking out the suitable color, cut, and size to match, to be set.

Jewelry Processing process:

Six, set the stone

Hand-set each diamond and gemstone, which is a technical job, to set the stone under dozens of times magnification.

Seven, polishing, electro-gold

The surface of the metal and the details of the part to do further polishing, some jewelry but also on the surface of the electro-gold treatment, so that it is more smooth.

Eight, quality control

Check the finished jewelry, if there are unqualified should be returned to make again.

I conclude: the above is what I have introduced to you about the jewelry processing process and 5 processes to create the perfect jewelry some content, I hope to help you. Do not look at a small piece of jewelry, it is after a lot of processes, only to manufacture into, show in front of us.