Can I change the valve core if the angle valve leaks? How to change the valve core when the angle valve leaks?

Bathroom decoration is a hassle. If we don't do it well, it may have a lot of influence on our future life. Aren't you a little old? Do you know that the angle valve can be replaced if it leaks? How to change the valve core when the angle valve leaks? Here is a brief introduction to the information that the angle valve can be replaced due to water leakage. Bathroom decoration is a hassle. If we don't do it well, it may have a lot of influence on our future life. Aren't you a little old? Do you know that the angle valve can be replaced if it leaks? How to change the valve core when the angle valve leaks? Here is a brief introduction to the information that the angle valve can be replaced due to water leakage.

Angle valve is leaking. Can I change the valve core?

Usually, the handle can be removed and the angle valve can be removed. Remove the handle first, there is a small decoration on the handle. First remove the handle with a screwdriver, and then remove the valve core with a wrench. Angle valve, also known as triangle valve, Angle valve and Angle water valve. This is because the pipeline is 90 degrees at the angle valve, so it is called angle valve, angle valve and angle water valve. The valve body of angle valve has three ports: water inlet, water control port and water outlet, so it is called triangle valve. Of course, the angle valve is also improving. Although there are still three ports, there are also angle valves that are not angular. Industrial angle valve: except that the valve body is right-angled, other structures are similar to straight-through single-seat valves.

How to disassemble the old valve core?

Method 1: First close the main water valve, then buckle the red and blue symbol on the faucet handle about 8mm, unscrew the fixing screw counterclockwise with a flat screwdriver, remove the handle, remove the faucet valve core with a spanner, open part of the gland with a spanner, and take out the ceramic valve core inside.

Method 2: Turn off the main water valve first. You can stick it under the faucet handle with a screwdriver and pry it up at will. You have to pry at the same time, slowly and evenly, so that the valve core can be removed.

Method 3: First close the main water valve, unscrew the blue cover on the right handle, loosen the screws inside with a cross screwdriver, remove the handle, and the valve core will be exposed, and then unscrew the valve core with adjustable wrench.

Ceramic valve core: Generally speaking, ceramic valve core plays an excellent sealing effect, because foreign technical strength is relatively strong, and some imported ceramic chips have better sealing function, stable physical function, wear resistance and long service life. At present, most of the mainstream faucets produced by most brand bathroom manufacturers in the market adopt ceramic valve cores.

Shaft spool: Its advantages are rolling cycle of handle, simple and clear operation, comfortable and relaxed feel, aging resistance and wear resistance.

Stainless steel ball valve: Now it is a high-tech faucet valve core. Some advanced bathroom brands use the irregular seven-hole steel ball valve core processed by laser technology as the valve core of their new faucet products.

The above is about the introduction of replacing the valve core of angle valve leakage. You can choose according to your needs! I hope my introduction can help you understand the leakage of angle valve and replace the valve core. You can go to the market to learn more. I hope you can choose the product that suits you.