Make kites.

Main materials: wooden nails, transparent tape, wrapping paper and paint.

Tools needed: paint brush, scissors, glue, ruler, art knife.

Production steps:

Step 1:

Tools and materials to be prepared

Step two:

Cutting and drawing: saw two support rods, 1 60 cm and 1 50 cm.

Step 3:

Draw a line at 25 cm of the 50 cm wooden strip, and then cut a small mouth.

Step 4:

Cut 1 notch at both ends of two pieces of wood, about 3 cm, and cut in the middle.

Step five:

Sandpaper the wood strips and paint them. Of course, the color of paint is your favorite.

Step 6:

Make a fringed tail: find out your favorite wrapping paper and cut it into strips about 3 cm wide and 20 cm long with a ruler and a craft knife.

Step 7:

Roll up the notes one by one with a stick to form a ponytail.

Step 8:

Blast the long head with plastic tape, and then pull out the stick, making sure to leave the hole in the stick. Repeat the above process and make 3 ponytail tassels.

Step 9:

Making connection point: find out the 60 cm wooden strip with the logo number 15 cm.

Step 10:

Tie two together with a piece of wood. Remember to bind two marker combinations, one small incision, one 15 cm and two X-shaped bandages. Tie a knot.

Step 1 1:

Find two strong lines.

Step 12:

Step 13:

Make sure the thread is tight, and tie the knot when the four sides are in place. Subtract the extra lines.

Step 14:

Add wings to make it fly: find a piece of paper big enough (you can spell one if it is not enough), and the paper should be stronger, then draw a schematic line on the edge of the line with a pencil, and then draw a folding line about 3 cm wide.