What does Class II integrated ceiling mean? How to install the primary ceiling and secondary ceiling?

Integrated ceiling and ordinary aluminum ceiling and wood ceiling is not the same, they are more beautiful and generous, and the service life is also relatively good, but also able to meet the basic lighting needs, in addition to careful observation can be found on the market a wide variety of integrated ceiling installation and control of the program can be graded classification, common may be the second level of integrated ceiling as well as the first level of integrated ceiling, so what do they mean? What do they mean? How should they be installed? Are there certain differences and discrepancies? Recommended for you today are these aspects of information, which can be found, the second level of integrated ceiling refers to the shape and modeling of the ceiling has a certain special place, the more layers, the more sense of hierarchy, it is more suitable for the height of the villa type of choice.

One, two integrated ceiling what means

In fact, not only a ceiling, two ceiling, there are three ceiling, but here to point out a misunderstanding is that "one, two, three," is not to say that the level of the ceiling, but refers to the shape of the ceiling, molding. The shape of the ceiling is not the level of the ceiling, but the shape and modeling. Specifically, the first level of the ceiling is equivalent to the first gradient, the second level of the ceiling is in a layer of the ceiling below and added a layer, while the third level is in the second level on the basis of an additional layer. The more layers, the more sense of hierarchy, can correspondingly reduce the height of the layer, especially suitable for layer height larger villa house type.

Two, a ceiling and ceiling installation

First of all, the installation of a ceiling should take into account the limitations of the floor height, in general, the ceiling needs to take up a 120-150mm floor height, but if you want to do reflective lighting slots have to be reserved to install the light of the space. After the end of the preliminary preparatory work for the construction of the keel and the installation of gypsum board.

In comparison, the installation of secondary ceiling is more complicated, so here is a specific description. The installation of secondary ceiling can be divided into three steps:

1, first of all, according to preferences to determine the need to install the form of secondary ceiling is concave or convex mode. Then install the keel according to the choice. The installation pattern of the keel needs to consider the alignment as well as the upper and lower differences. Straight keel installation and traditional installation methods are similar, but its structure is a double layer structure, L or concave convex and other specific shapes are installed in a very different way, specific words can consult the installation of master.

2. The size of the keel is fixed, but can be cut according to their own needs to make different shapes. Of course, according to the different installation modes of its border for small trimming. Then connect it with L-type joints and tighten it with screws, which completes the overall installation.

3. The last step is to install the grommet light fixtures and so on, and do a good job of the lower layer can be. The installation of the lower layer is more convenient, and the installation of the ordinary integrated ceiling is the same.

The above is recommended for you about the industry of secondary integrated ceiling and their respective corresponding installation methods and steps. From this, we can learn that the reason why a variety of integrated ceiling is divided into a level of integrated ceiling and a level of integrated ceiling, not because of their environmental protection level or the quality of the degree of reliability, but because of their respective shapes and forms are not the same, the common level of integrated ceiling, meaning that they are in the original first level of integrated ceiling on the basis of an additional layer, the more the level the more a sense of hierarchy, more suitable for the villa house type with a large floor height. The higher the layer, the more sense of hierarchy, more suitable for the acquisition of villa room type with large layer height. And the corresponding later specific performance situation also depends on the ceiling installation operation process details.

Tubapu online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~