How to make a fishing rod with a bamboo pole?

1. When making bamboo poles, it is best to use Zizhu, Dianzhu, Asparagus and Phyllostachys pubescens.

2, bamboo should be fully mature, fully air-dried, thin tube, light weight, short and straight joints, elastic, and have a certain bearing capacity, preferably two or three years of bamboo. Mangosteen is used at the tip of the pole, and it can't be used if there are insect-eaten cracks;

3. When encountering a curved bamboo pole, first put the bamboo pole on the stove for warm baking, slowly rotate it from coarse to fine, and straighten it. Don't cut the barb on the knot too deep, so as not to lose skin and hurt the rod;

4. The length of the segmented pole is 1, 75 to 1, 80 meters, and then it is polished with sandpaper. Do not remove the bamboo skin, especially the plugs of the two poles, and carefully polish them until they are closely matched with each other;

5. Wrap the sleeve with thin iron wire or thin iron wire at least 10 cm, the inner section of the rod can be opened, and the thin rod can be inserted separately. If you need to catch big fish, you can put a fishing wheel on the last rod of the fishing rod. This durable fishing rod has been successfully made.