Treatment method of gap between stone and wood floor

Stone and wood floor are commonly used floor decoration materials, but there are cracks in the use process, which need to be treated to beautify the decoration effect and prevent stains and water droplets from entering the cracks and causing damage. Here is a brief introduction to the gap treatment method of stone and wood floor.

Stone glue joint filling method

Stone glue is an environmentally friendly, odorless, colorless, waterproof, mildew-proof, scale-proof and weather-resistant joint filler, which is suitable for filling gaps in various indoor and outdoor stones. When caulking, first clean up the dust and oil stain on the stone surface, coat the stone glue on the gap and scrape it evenly with a scraper. After the stone glue is dried, it can be polished with sandpaper.

Cement joint filling method

Cement joint filling is a traditional method. Before caulking, the impurities such as dust, grease and paint on the stone should be removed, then cement and water should be stirred evenly according to a certain proportion, the cement slurry should be filled into the gap, compacted with a scraper, polished to dryness with a grinder, and finally waxed.

Lime joint filling method

This method is mainly suitable for the restoration of ancient buildings and cultural monuments. Generally, caulking on the surface of decorative layer can reduce the secondary damage to stone. The method of concrete joint filling is similar to cement joint filling, except that the material is replaced by lime paste.

Joint filling paste method

Joint sealant is an ointment-like material, which is specially used to fill the gaps in wood floors. Gap filling is easier, and the effect after gap filling is more beautiful. And there are many colors to choose from, which can match the floor well. When caulking, clean the gap first, then put the caulking paste on the gap, and when it is dry, polish the floor surface with a grinder.

Wood-wood joint filling method

Mywood, similar to cement caulking, is a kind of wood caulking material, which can fill the gaps of wood floors of different colors and sizes. Before caulking, soak the wood. After it absorbs enough water, cut it into small pieces with a cutting tool. Then mix lime slurry in a certain proportion and smear it in the gaps. Then drive the wood into the gaps. After it is dried, polish it with a grinder.