How to make baskets by hand?

The tutorial of Zilan Manual is as follows:

Material preparation: braided belt, scissors and rope. Operating steps:

1. Cut the woven belt into four sections with the same length (the length depends on the size of the basket you want to weave, length = bottom diameter +2 height+10cm), and these sections are 45cm long. Braid the braid as shown in the middle, and tie it with a string for easy fixation.

2. Cut the tape in half.

3. Knit a circle up and down with the belt cut to the width of 1/4 (the bottom can only be woven flat with thin tape).

4. Make a second circle with another belt, which is opposite to the top and bottom of the first circle.

5, the third lap is tightened, so that the front can be fixed.

6, the fourth lap, the fifth lap, etc. Conversely, try to adjust the blue evenly.

7. Cut off the excess tape until it reaches the size you want.

8. Fold the blue ribbon like this.

9. Weave the side with the belt cut into 1/2 width, cut the beginning part into an inclined plane and try to connect with the bottom.

10, it's better to line a flowerpot with a suitable size in the middle, so as to control the shape better.

1 1, the joints are connected in this way, and they will be fixed after the next lap.

12. After reaching the required height, cut it into an inclined plane and close the head to make the upper edge as horizontal as possible.

13. Fold the remaining strap as tightly as possible at the upper end for insertion. Note that the inside is inserted outward and the outside is inserted inward, so that there must be both sides. Besides, I use extra blue cushions as decoration.

14, it has been compiled, and this is what it looks like inside.

15, this is what the bottom looks like. It's okay to be a little rough. It will only take a few days to press the heavy objects.

16, just put the flower basket, and the work is finished.