Basic stitch of cross stitch

1. Select 2 threads with the same number as those marked on the pattern, cut them according to the required length, and embroider them from the center of the pattern and embroidered cloth;

2. When embroidering, the overlapping direction of the crosshairs should be consistent;

3. When starting embroidery, don't tie the thread, leave a thread end of about 1cm on the back of the fabric, and press it with the thread;

4. Don't pull the thread too tight or too loose when embroidery, and don't pull the thread too tight or too loose when embroidery;

5. Follow the above steps in turn.

Problems that should be paid attention to during screening:

1, in the same direction. When you embroider a cross, you must pay attention to the same embroidery direction. If embroidery starts from top to bottom and from left to right, then the whole work must follow the same direction, otherwise it will destroy the whole work. Because personal habits are different, and the direction of embroidery will be different, but we still have to follow its consistency.

2. Find the position of the center point. Be sure to find the center of the cloth before you start embroidering the picture, otherwise it may cause the dilemma that the picture cannot be mounted smoothly after embroidering.