How to construct mahogany rubbings?

The rubbing of painted furniture is to mix large paint and color essence into clear water paint, and then spray it on mahogany furniture.

Waxed mahogany furniture does not need to be colored. The wax ironing process on furniture has the following five steps:

Step 1: Melt the wax

Melting wax: put beeswax in a metal container and heat it to melt it into liquid.

Step 2: Use two (or three) bristle brushes to light beeswax on the furniture like stars (side by side).

Step 3: Hot wax

When heating with an electric bow, be sure to keep moving with the electric bow, brush the wax evenly to all parts with a large brush, and the electric bow will move with it. Be careful not to burn the skin, this step is the most critical. If the moisture content of (new) furniture is high, the heating must be gradual, and the wax should gradually penetrate into the inner layer of wood. When the wax bubbles evenly and no longer penetrates into the inner layer of wood.

Step 4: Waxing

Use a wax screwdriver to shovel off the floating wax remaining on the furniture surface until the hands feel sticky.

Step 5: Wipe the wax.

Wipe it with cotton cloth repeatedly like taking a bath until it is shiny and feels better lubricated.

These are two methods of painting and waxing the surface of mahogany furniture. thank you