What materials do you need to install floor heating?

Warm strip, reflective film, steel wire mesh, insulation board, clamp, floor heating pipeline, water separator.

If you want to install floor heating. All materials need to be prepared in advance, and some of them belong to basic materials. For example, heat insulation strips are installed around the ground, mainly through the wall to prevent heat loss. There is also a reflective film, whose main function is to reflect heat upwards and reduce heat loss. In addition, there are steel wire mesh and insulation board, which are definitely indispensable, because it can prevent heat from passing down and reduce heat loss.

There is also the need for a nail to fix the floor heating pipeline when installing the floor heating. You also need to prepare floor heating pipes, which are basic materials. Installation requires concrete. Sand and cement shall be used for the backfill of floor heating, and the selected cement grade shall not be less than 32.5. It is best to choose medium sand, the surface should be smooth, and the particle size should be controlled at about10 mm.

Matters needing attention in floor heating installation

1, be sure to find a construction team with professional knowledge of floor heating.

2. The sealing performance of the floor heating system must be checked before paving.

3, the ground must be dry (can be judged by experimental phenomena), and the water content of cement ground is preferably below 1.5%; The indoor humidity should not be too high. Whether there is geothermal heating or not, the ambient humidity before and after installation is about 60 degrees.

4. Before laying the reinforced floor, EPE composite membrane should be laid (the words special for floor heating radiation must be marked on the EPE composite membrane) to isolate moisture and release it from the skirting board around.

The above contents refer to Baidu Encyclopedia classification-floor heating, people's network-home heating methods? Precautions for home heating?