Traditional Culture Encyclopedia - Traditional festivals - Pictures and names of truck parts

Pictures and names of truck parts

As shown in the figure:

40,000-60,000 kilometers to replace the brake pads. Relatively speaking, the second insurance is very important. The project involves the inspection and maintenance of up to 63 projects in eight parts, including engine, automatic gearbox, air conditioning system, steering system, braking system, suspension system, body part and tires.

In addition, it also includes quality inspection and debugging. It can be seen that after so many tests and maintenance, the condition of the whole vehicle will obviously enter the best state, and the driving safety can be best guaranteed.

In the extended information, note that one of the tire maintenance items of tire wear mark II is tire transposition. If a spare tire is used in an emergency, the owner should replace it with a standard tire as soon as possible. Because of the particularity of spare tire, Buick did not adopt the method of cyclic transposition of spare tire and other tires, but four tires were transposed diagonally.

The purpose is to make the tire wear more evenly and prolong its service life. In addition, the tire maintenance project also includes adjusting the air pressure. For tire pressure, the owner should not be underestimated. If the tire pressure is too high, it is easy to wear the middle of the tread. It is worth reminding that it is difficult for car owners to measure tire pressure intuitively and accurately without relying on barometer. There are some details about the daily use of tires.

If you pay attention to the distance between the tread and the wear marks, generally speaking, the tire should be replaced if the distance is within 2-3 mm, and if the tire is punctured, if it is the sidewall, the owner must not listen to the advice of the quick repair shop to repair the tire, but should change the tire immediately, otherwise the consequences will be very serious. Because the sidewall is very thin, it will not bear the weight of the car after repair, and it is easy to puncture.