The radiator inlet is not hot, what is the heat at the outlet? Is it normal for the water discharged from the inlet and outlet to be around 40 degrees?

The inlet is not hot, but the outlet is hot, because the inlet pressure is not enough, and the outlet heat is the heat returned by other heating.

It can be installed as long as there is central heating or soil heating. Installation is very simple. By connecting the tap water pipe with the inlet and outlet of the warm air pipe, hot water with the same pressure as tap water and the same temperature as the heater can be released.

Before heating, heat exchangers are installed in the two groups, so that the water temperature is high and the heating temperature of other radiators will not be affected; If it is installed at the end, the water temperature will be lower than the inlet water temperature 10~20℃, and the use effect will not be achieved.

Extended data:

Structure:

The two ends of the barrel of the warm water heater are provided with installation ports for the inlet and outlet of warm air and tap water, and tap water is filled in the barrel, and the hot air heats the tap water in the barrel through a heat exchange system in the barrel; There are two water distribution devices at both ends inside, which can make tap water slowly injected into the cylinder of central heating water heater, so that cold and hot water can be evenly separated and hot water can be pushed out of the cylinder at the same time, achieving the use effect.

The inside and outside of the water heater are made of high-quality food-grade stainless steel or galvanized process. It has passed the water pressure test of 1.2MPa before leaving the factory. It is corrosion-resistant, pollution-free, safe, reliable and durable.

There are various models and varieties of water heaters. There are vertical, horizontal and circular; There are also barrel type, box type and combined type. Can also be customized according to the special requirements of customers.

Baidu encyclopedia-water heater