Graphic course on how to drain water from washing machine.

How to let the water out of the washing machine?

Step 1: The rear cover can be completely opened after the power supply is cut off. There is an electromagnetic valve below and a column shaft in the middle. Push toward the solenoid valve, and then open the drain valve. Drain and let it go.

Step 2: Open the back cover after semi-automatic power failure. There is a round cover with plastic rope on the pipe below, just lift it up.

Step 3, open the lid on the back of the washing machine, and you will see a line connected to a lid, covering the drain. As long as the line is raised, the valve at the drain will open and the water will be released.

Step 4: During normal drainage, the steel wire pulls the red circle member to the left. When power is cut off, the components can be emptied by hand;