Difference between cathode pusher kiln and roller kiln of lithium battery

1, roller kiln. The refractory plate is directly driven by high-temperature resistant ceramic rods, and the refractory plate loaded with products is directly loaded on the rods, also known as roller kiln. The earliest imported bricks were fired on the wall without pallets, and the floor tiles were directly placed on sticks. Because the temperature difference during preheating, firing and cooling is very small, the firing time is shortened from more than ten hours in the past shuttle kiln and tunnel kiln, so it is extended to art ceramics and daily-use ceramics. With the improvement of bar quality, it gradually changes from low temperature type to medium and high temperature type.

2. The cathode pusher kiln of lithium battery is also a narrow tunnel kiln. It only refers to trolley tunnel kiln, and tidal tunnel kiln is called push plate kiln. The pusher kiln is a fire-resistant plate directly installed on the high-temperature guide rail. (For example, the guide rail of Wang Gang brick or corundum ball can roll in situ. Due to the load-bearing thrust of fire-resistant board, it is generally not long, 20 meters long or a few meters short, and the daily output is not large.