Radiator installation method?

The correct installation method of the heater

1, laying pipes

After determining the installation location of the radiator, you need to design the piping line, the piping line is generally in the ceiling, skirting, and other hidden places, the laying of the open pipe as far as possible not to affect the indoor decorating or take up too much space.

2, the installation of the heater

The heater will be placed on a smooth, and with a level ruler to measure, to see whether the installation is smooth, and then connect the valve connectors and inlet and outlet valves are connected, after checking the correct, with a pipe wrench for reinforcement.

3, the installation of wall-hung boilers

Installation of wall-hung boilers should pay attention to the open wires and electrical equipment separated, that is, the wall-hung boilers and gas meters and gas stoves should be more than 300mm distance.

4, pressure test and customer acceptance

Don't forget the final test and acceptance, the construction workers in the pipeline stamping test did not run, bubble, leak, drip and other phenomena, by the pipe clamps for reinforcement. The phenomenon of no run, risk, leakage, dripping, etc., can be accepted after checking and confirming by the customer.

Villa Master provides you with local house building policy, house building drawings, villa design drawings;

Villa appearance effect drawings service, thousands of explosive red drawings for you to choose: www.bieshu.com?bdfc