How to install the air conditioner hang-up machine

When installing the air conditioner hanger, first select the installation position and determine the installation height, then mark the punching position according to the installation plate, then punch holes with a drilling machine, then connect the connecting pipe between the air conditioner hanger and the outdoor unit, and finally hang and fix the air conditioner.

The specific operation steps are as follows:

1. First of all, we need to take down the mounting plate on the back of the air conditioning rack and put it in the position we reserved before. At this time, it is necessary to keep the reserved plate level. Then use a drill to punch a hole to fix the air conditioner hanger. Generally speaking, four to six are needed, because only in this way can the mounting plate of the air conditioner hang-up machine be ensured to be horizontal.

2. Choose a suitable drill bit according to the model of the air conditioner hanging machine, and use an electric hammer or diamond to punch holes in the wall. When we make a hole in the wall, we should avoid wires or other foreign objects outside the wall, and the hole through the wall should be lower than the installation position of the air conditioner hanging machine.

After the above preparations are completed, we can install the air conditioner and hang up. First of all, we need to connect the connecting pipe between the air-conditioning hang-up machine and the outdoor unit, place the air-conditioning hang-up machine gently to avoid scratches, then adjust the position of the output pipe and the input pipe in detail, and then wrap up the connected pipe, with the power cord and signal wire at the top, the connecting pipe in the middle and the water pipe at the bottom. But be careful not to use force when dressing. After all these are ready, we can install the air-conditioning hanger, and put the wrapped pipes and wires through the wall holes we made before, so that the air-conditioning hanger can be hung directly and fixed by the previous fixing holes.