How to make walnut bracelets?

Tools include electric drills, vises and electric drills.

Step 2 choose walnuts

Choose the walnut you like. Walnut bracelets should be unique and beautiful in appearance, and the most important thing is to be small and even.

Step 3 polish walnuts

After selecting walnuts, some modifications are needed. Because the tips of some walnuts are particularly long and need to be smoothed, the walnut bracelets made in this way are more beautiful. There is a millstone behind the electric drill. Walnuts are used to grind the tips of walnuts.

4. Walnut drilling

After polishing the walnuts, it's time to drill holes. First find the top of the walnut, and then clamp the walnut on the vise. Elastic waist should be moderate, not too tight, too tight may cause cracking or deformation, nor too loose, easy to leak. Then punch holes with an electric drill, and pay attention to the alignment of the holes.

I suggest you drill holes from both ends. Be sure to drill into it bit by bit. Don't worry. If you don't have a vise, you can fix the walnut with a mineral water bottle, then make a shallow hole at the tip, then hold the walnut in one hand and the electric drill in the other, so that you can master the direction and drill into the opposite eye bit by bit.

Use your hands evenly. In order to ensure that the two holes can be connected, you can drill in the walnut for a period of time to make it bigger, so it is easy to connect.

5. Walnuts are strung with beads

Drilling is successful, pass through with an awl. Trim the tip again to make it look better for later sale. After drilling holes for walnuts, it is necessary to wear walnuts. You can choose some beads when you wear walnuts. These beads play a matching role, and you can match them at will according to your own preferences.