What if there are wrinkles in calligraphy and painting?

Turn a piece of paper upside down and stick it on the glass, then spray water drops with a watering can and spread a layer evenly on the paper. Then use a brush to drive the bubbles back and forth. This step is the most difficult, pay attention to brushing. Pay attention to the strength and method of brushing your teeth, it is necessary to work hard. If you are not careful, you may tear this paper with water.

This is the method of mounting, which is very useful if wrinkles are removed. But it just flattened the paper. Some rice paper will flatten when it dries, and some will wrinkle.

Step 2 use an iron

With an iron, first fold the calligraphy and painting in half, and then iron the middle with an iron. Don't press the four sides in half too hard. Then unfold the whole piece. Folding the four sides will leave a folding line on the paper. You can spray a little water or not, and then flatten the folding line with an iron. If you do this, it will not be peaceful, but it is also relatively simple and you can see the past normally.

Extended data:

There is such a jargon in the art world that it is better to post a thousand than a thousand. Of course, there is no benefit in posting more than 1000 articles, but without one article, there will be endless troubles, which will directly lead to the repair of the mounted paintings and calligraphy, and there will be new fractures, which makes people feel that the previous efforts have been in vain.

Objectively speaking, it is normal for a restored and framed painting and calligraphy to have several creases, but if there are too many creases, it will cause new damage to the old painting and calligraphy again. Therefore, restorers are cautious about this process.

1, riding seam sticker:

The requirement of riding seam stickers is that the center line of the folding strip coincides with the broken mark. That is to say, stick the folded strip in the center of the broken strip. Imagine that when we draw lines for a broken line, some lines have deviated from the center of the broken line, and when we stick the strip, the strip is tilted because of carelessness and other reasons, resulting in the edge of the strip being flush with the broken line; This not only does not strengthen, but increases the severity of this fracture. ?

2, multiple stickers:

Multi-pasting means that one layer of folding strips can't resist the crease, and it needs multi-layer pasting to solve it. The most common is the stacked pagoda shape. For example, a painting with a thick heart is completely broken. When a thin layer (about 0.2 cm) of folded strips is stacked, it is found that the overlapped strips still have creases, so it is necessary to stack another layer in the original position. ?