How to adjust the drift and bait according to the fish situation in Taiwan fishing 。。。。

I), without bait adjustment

1, empty hook, half water adjustment 4 eyes (that is, usually referred to as 4 fishing 2)

-- adjustment steps:

(1) first in the empty hook, half-water, through the increase or decrease of the lead skin will be adjusted to the buoy to 4 eyes;

(2) and then hang double bait (simulated bait) The size and weight of the bait is basically the same as that of the real bait, the same as below), and move the buoy to reach 2 meshes;

--Observe the state of the bait ball underwater: the lower bait touches the bottom, the upper bait is suspended, and the lower hook bait has a slightly curved subline.

--The main influence factors: the size and weight of the bait group requires strict requirements, the requirement for consistency;

This method is widely used for the current "not spirit, not blunt" fishing method, most anglers believe that this method is more suitable for the competition pool fishing, the principle is not suitable for The most important thing to remember is that it's not a good idea to go out in the open.

2. Empty hook, half-water leveling

--The steps of leveling:

(1) First, in the empty hook, half-water, by increasing or decreasing the lead, the tip of the buoy will be adjusted to the level of the water;

(2) then hang double bait, move the buoy to determine the fishing eye N (for example, N = 1, 2 or 3);

--Bait, moving the buoy to determine the fishing eye N (for example, N = 1, 2 or 3);

--Baits, baiting, baiting, baiting.

--Bait group in the underwater state: affected by the size and weight of the bait group, double bait lying on the bottom, the subline is in a bent state;

--Applicable fishing occasions (environment): belongs to the fishing blunt, should be used in the environment of the wind, waves, water flow interference.

3, no hooks, half-water leveling

--The steps of adjusting the mark:

(1) first, no hooks and strings are hung on the lead pendant, and in half-water, the lead is increased or decreased to adjust the mark tip to level water;

(2) then hang the double bait, and move the buoy upward to determine the fishing aim N (e.g., N = 1, 2 or 3);

(3) then hang the double bait, and move the buoy upward to determine the fishing aim N (e.g., N = 1, 2 or 3) );

--Observe the state of the bait group underwater: the lead drop touches the bottom (or lies on the bottom), and the hook (bait group) and the fishing line lie across the bottom;

--Applicable to the fishing environment: it belongs to the extreme fishing bluntness, which is used for preventing small fish from making trouble in the nest, as well as catching Difficult and slippery fish.

(2) Adjusting the mark with bait

1、Double bait, half-water to level water

-Adjusting the mark step by step:

(1) First, double hooks hang the bait, and then adjust the mark tip to level water by adding or subtracting the lead sheet in half-water;

(2) Then, move up the float to determine the fishing aim, so that the mark tip is exposed to the surface of the water.

(2) Then move the buoy upward to determine the fishing aim, so that the tip of the buoy is exposed to the surface of the water for N eyes (N=1, 2 or 3 eyes);

--Bait ball and submarine in the underwater condition:

(1) When as long as you can see the fishing aim, the lower bait must be in the end, when the fishing aim is within 3 eyes, the bait ball is in the upper bait suspended under water, the lower bait is lightly touching the bottom, and the submarine line has a slight bending.

(2) Even when I adjusted the fishing eye to 4 eyes, the top bait was still in suspension, only the bottom hook bait subline was obviously bent.

--Sensitivity and Practicality:

(1) This kind of tuning method is very sensitive because the influence of the weight of the double bait is completely eliminated when determining the tuning eye.

(2) Since the sensitivity is very high, the stability becomes relatively poor, so I think, it may not be suitable for wild fishing and when the wind and waves are big and there is a current flowing environment.

2, single bait, half-water leveling

--The steps of adjusting the mark:

(1) first single hook (top hook or bottom hook) hook bait, through the increase or decrease of the lead to adjust the tip of the mark to level water;

(2) then hang the double bait, move upward the buoy so that it rises to the surface of the water to reveal the N eyes (N = 1, 2 eyes can be). 1, 2 eyes can be). At this time, the state of the bait: the lower bait touches the bottom, the upper bait is suspended, the subline has a slight bend of 1-2 mesh;

(3) When the fishing eye is adjusted to 3 mesh and higher, the subline is even more curved, and the double bait are lying on the bottom

(4) When the buoy's reticle is moved upward to the point that all of it is exposed to the surface of the water, the lead drop touches the bottom.

--Phenomenon Observation and Analysis:

When hanging up the double bait, I observed that: when the buoy moves upward until the tip of the mark is in the flat water state, it is in the most sensitive state, at this time, the lower bait touches the bottom lightly, the upper bait is suspended, and the subline is completely vertical. Therefore, theoretically speaking, fishing "flat water" is the most sensitive, but this is not a practical fishing aim, firstly, it is not easy to observe the sight mark tip flat water, secondly, because the whole fishing group is too sensitive and the stability is very poor, in practice, generally fishing 1-3 eyes, at this time, the lower bait lightly touching the bottom, the upper bait suspension, the subline slightly bent 1-2 eyes, the lower bait lightly touching the bottom, the upper bait suspension, the upper bait suspension, the subline slightly bent 1-2 eyes. The subline is slightly bent 1-2 meshes.

(3) Conclusion: Through the comprehensive comparison of the above several tuning methods, according to the order of sensitivity from high to low, I think it should be: double bait to adjust the flat water, single bait to adjust the flat water, empty hooks to adjust the 4 eyes, empty hooks to adjust the flat water, no hooks to adjust the flat water.

(D), conclusion:

(1) the above debugging, testing is only in the tuning cylinder static debugging, if you get the actual application, may also need to make some minor adjustments and changes;

(2) the debugging, testing is used "fishing fairy" 3 #. 11 mesh fine tail buoy, at the same time, I think it should be: double bait to adjust flat water, empty hook to adjust 4 eyes, empty hook to adjust flat water, no hook to adjust flat water, 11 mesh fine-tailed buoys, but also used "no sky" 4 #, 7 mesh thick tail (2 mm) buoys as a comparison, and achieved consistent test results.

Additional information:

1. When fishing with empty hooks and half-water, the state of the two hooks is as follows: the lower hook is lying on the bottom, the upper hook is lightly touching the bottom, and the subline has different degrees of bending.

2. (Empty hook, half water) 4 eyes, the fishing eyes show the following:

1 eyes: upper hook bait suspended, lower hook bait lightly touching the bottom, the lower subline is basically straight (slightly curved);

2 eyes: upper hook bait suspended, critical (rubbing) the bottom, lower hook bait lying on the bottom, the subline is slightly curved;

3 eyes: upper hook bait touching the bottom, the lower hook bait lying on the bottom, the upper subline is curved; the bottom subline is severely curved;

3 eyes: upper bait touching the bottom, lower bait lying on the bottom, the upper subline is curved; the lower subline is curved; the lower subline is curved; the lower subline is bent. Serious bending;

4 eyes: double bait lying on the bottom, double subline serious bending;

5 eyes: double bait lying on the bottom, double subline serious bending;

I), without bait tuning

1, empty hooks, half-water tuning 4 eyes (i.e., usually referred to as adjusting the 4 fishing 2)

--The tuning mark Steps:

(1) Firstly, when the hook is empty and the water is half water, adjust the buoy to 4 eyes by increasing or decreasing the lead skin;

(2) Then, hang the double bait (simulated bait, which is basically the same as the real bait in terms of size and weight, the same as the following), and move the buoy to reach the fishing eye 2;

--Observe the bait group in the submerged state: the lower bait touches the bottom, the upper bait is suspended, the lower bait touches the bottom, the upper bait is suspended, the upper bait is suspended. touch the bottom, the upper bait suspended, the lower hook bait subline slightly bent.

--The main influence factors: the size and weight of the bait group requires strict requirements, the requirement for consistency;

This method is widely used for the current "no spirit, no blunt" fishing method, most anglers believe that this method is more suitable for tournament fishing, the principle is not suitable for the The most important thing to remember is that it's not a good idea to go out in the open.

2. Empty hook, half-water leveling

--The steps of leveling:

(1) First, in the empty hook, half-water, by increasing or decreasing the lead, the tip of the buoy will be adjusted to the level of the water;

(2) then hang double bait, move the buoy to determine the fishing eye N (for example, N = 1, 2 or 3);

--Bait, moving the buoy to determine the fishing eye N (for example, N = 1, 2 or 3);

--Baits, baiting, baiting, baiting.

--Bait group in the underwater state: affected by the size and weight of the bait group, double bait lying on the bottom, the subline is in a bent state;

--Applicable fishing occasions (environment): belongs to the fishing blunt, should be used in the environment of the wind, waves, water flow interference.

3, no hooks, half-water leveling

--The steps of adjusting the mark:

(1) first, no hooks and strings are hung on the lead pendant, and in half-water, the lead is increased or decreased to adjust the mark tip to level water;

(2) then hang the double bait, and move the buoy upward to determine the fishing aim N (e.g., N = 1, 2 or 3);

(3) then hang the double bait, and move the buoy upward to determine the fishing aim N (e.g., N = 1, 2 or 3) );

--Observe the state of the bait group underwater: the lead drop touches the bottom (or lies on the bottom), and the hook (bait group) and the fishing line lie across the bottom;

--Applicable to the fishing environment: it belongs to the extreme fishing bluntness, which is used for preventing small fish from making trouble in the nest, as well as catching Difficult and slippery fish.

(2) Adjusting the mark with bait

1、Double bait, half-water to level water

-Adjusting the mark step by step:

(1) First, double hooks with bait, and then adjust the mark tip to level water by adding or subtracting the lead sheet in half-water;

(2) Then, move up the float to determine the fishing aim, so that the mark tip is exposed to the surface of the water.

(2) Then move the buoy upward to determine the fishing aim, so that the tip of the buoy is exposed to the surface of the water for N eyes (N=1, 2 or 3 eyes);

--Bait ball and submarine in the underwater condition:

(1) When as long as you can see the fishing aim, the lower bait must be in the end, when the fishing aim is within 3 eyes, the bait ball is in the upper bait suspended under water, the lower bait is lightly touching the bottom, and the submarine line has a slight bending.

(2) Even when I adjusted the fishing eye to 4 eyes, the top bait was still in suspension, only the bottom hook bait subline was obviously bent.

--Sensitivity and Practicality:

(1) This kind of tuning method is very sensitive because the influence of the weight of the double bait is completely eliminated when determining the tuning eye.

(2) Since the sensitivity is very high, the stability becomes relatively poor, so I think, it may not be suitable for wild fishing and when the wind and waves are big and there is a current flowing environment.

2, single bait, half-water leveling

--The steps of adjusting the mark:

(1) first single hook (top hook or bottom hook) hook bait, through the increase or decrease of the lead to adjust the tip of the mark to level water;

(2) then hang the double bait, move upward the buoy so that it rises to the surface of the water to reveal the N eyes (N = 1, 2 eyes can be). 1, 2 eyes can be). At this time, the state of the bait: the bottom bait touches the bottom, the top bait is suspended, the subline has a slight bend of 1-2 mesh;

(3) When the fishing eye adjusted to 3 mesh and higher, the subline is even more curved, and the double bait are lying on the bottom

(4) When the buoy's reticle is moved upward to the point that all of it is exposed to the surface of the water, the lead drop touches the bottom.

--Phenomenon Observation and Analysis:

When hanging up the double bait, I observed that: when the buoy moves upward until the tip of the mark is in the flat water state, it is in the most sensitive state, at this time, the lower bait touches the bottom lightly, the upper bait is suspended, and the subline is completely vertical. Therefore, theoretically speaking, fishing "flat water" is the most sensitive, but this is not a practical fishing aim, firstly, it is not easy to observe the sight mark tip flat water, secondly, because the whole fishing group is too sensitive and the stability is very poor, in practice, generally fishing 1-3 eyes, at this time, the lower bait lightly touching the bottom, the upper bait suspension, the subline slightly bent 1-2 eyes, the lower bait lightly touching the bottom, the upper bait suspension, the upper bait suspension, the subline slightly bent 1-2 eyes. The subline is slightly bent 1-2 meshes.

(3) Conclusion: Through the comprehensive comparison of the above several tuning methods, according to the order of sensitivity from high to low, I think it should be: double bait to adjust the flat water, single bait to adjust the flat water, empty hooks to adjust the 4 eyes, empty hooks to adjust the flat water, no hooks to adjust the flat water.

(D), conclusion:

(1) the above debugging, testing is only in the tuning cylinder static debugging, if you get the actual application, may also need to make some minor adjustments and changes;

(2) the debugging, testing is used "fishing fairy" 3 #. 11 mesh fine tail buoy, at the same time, I think it should be: double bait to adjust flat water, empty hook to adjust 4 eyes, empty hook to adjust flat water, no hook to adjust flat water, 11 mesh fine-tailed buoys, but also used "no sky" 4 #, 7 mesh thick tail (2 mm) buoys as a comparison, and achieved consistent test results.

Additional information:

1. When fishing with empty hooks and half-water, the state of the two hooks is as follows: the lower hook is lying on the bottom, the upper hook is lightly touching the bottom, and the subline has different degrees of bending.

2. (Empty hook, half water) 4 eyes, the fishing eyes show the following:

1 eyes: upper hook bait suspended, lower hook bait lightly touching the bottom, the lower subline is basically straight (slightly curved);

2 eyes: upper hook bait suspended, critical (rubbing) the bottom, lower hook bait lying on the bottom, the subline is slightly curved;

3 eyes: upper hook bait touching the bottom, the lower hook bait lying on the bottom, the upper subline is curved; the bottom subline is severely curved;

3 eyes: upper bait touching the bottom, lower bait lying on the bottom, the upper subline is curved; the lower subline is curved; the lower subline is curved; the lower subline is bent.

4 eyes: double bait lying on the bottom, double subline seriously bent;

5 eyes: double bait lying on the bottom, double subline seriously bent;

Taiwanese fishing bait production formula 1.the main raw materials selection

Making powder bait raw materials are divided into two major categories of plant and animal, plant raw materials commonly used in wheat, corn, barley, soybeans, soybean cake, sweet potatoes, Potato, seaweed, dried grass

and so on; animal raw materials are mainly fishmeal, Antarctic shrimp powder, eel powder, animal liver powder, egg yolk powder and so on. If you are fishing for certain target fish, you should also prepare some chicken,

duck, pig, goat and other blood and mussels, fresh shrimp, snail meat into the pulp, etc. In addition, you should also prepare a variety of specialized bait. In addition, you should also prepare a variety of special bait required to mix the food flavor, food coloring and related

flavor.

2. Processing procedures

(1) First of all, barley, wheat, corn, soybean cake and other raw materials with a grinder were ground into coarse and fine, stored in bags. Mixing special bait for carp and cyprinids, the material is ground coarser, and the bait for

carp should be finer.

(2) and then the material baked and fried until the color yellowish uniform. Each species is fried separately, and master the points of gentle fire, diligent frying, and a small amount.

(3) After the baking and frying of the raw materials to be cooled naturally, according to the ratio of different special bait poured into the basin and mix, and then the water-soluble edible flavor and other lure agent together with pouring

and mix well. Then bake at a low temperature or stir-fry over a gentle fire to remove excess water. Finally, the prepared bait according to each dosage were packed into a new plastic bag with good sealing to store

to prevent the smell, mold.

3. Several commonly used bait ratio

(1) Carp bait According to the fishing day with 0.2 kg, a dosage of 2 kg is appropriate. The proportion of various materials is: soybean flour or bean cake flour 15%, sweet potato flour or potato flour 15%, fine jade

Rice flour 45%, barley flour 20%, egg yolk powder 5%, and then add an appropriate amount of fragrant powder and white, yellow and other food coloring.

(2) Carp bait The carp is big, strong and has a big appetite, so the ingredients should be no less than 3 kilograms at a time, and the material should be a little thicker. Specific ratios are: barley flour 25%, cornmeal

40%, silkworm chrysalis powder or fish meal 15%, animal liver powder 5%, sweet potato flour or potato flour 15%, and then add an appropriate amount of strong flavor food spices and food coloring.

(3) Grass Fish Bait Taiwan fishing bait preparation is mainly vegetarian. The main ingredients are 30% dried grass powder, 15% wheat flour, 20% corn flour, 25% potato flour, and then add 10% seaweed powder.

This

bait into the water will begin to melt and disperse, grass flavor, algae flavor drift with the waves, can quickly attract a group of grass carp convergence fishing point.