What kinds of floor tiles do you usually have? What kind of decoration is better?

There are three kinds of floor tiles: polished tiles, vitrified tiles and all-ceramic tiles. Of course, the decoration is vitrified brick, which is naturally pollution-free.

1. polished brick: polished brick is a kind of bright brick made by polishing the surface of brick blank, which belongs to the whole brick. Compared with the whole brick, the surface of polished brick is much smoother.

Polished tiles are hard and wear-resistant, suitable for use in indoor spaces such as bathrooms and kitchens. Based on the application of flower infiltration technology, polished tiles can make various stone-like and wood-like effects.

2. Vitrified brick: it is the common name of porcelain polished brick. It is a bright brick polished from the surface of the whole brick body, belonging to the whole brick. Ceramic tiles with water absorption less than 0.5% are called vitrified tiles, and polished tiles with water absorption less than 0.5% are also vitrified tiles (above 0.5%, only polished tiles are not vitrified tiles);

Then, the vitrified brick is polished on the mirror surface to obtain the vitrified polished brick. Because of the low water absorption, the hardness is relatively high and it is not easy to scratch.

Vitrified bricks can be widely used in floors and walls of various projects and families. Common specifications are 400x400mm, 500x500mm, 600x600mm, 800x800mm, 900x900mm, 1000 x 1000 mm ... The water absorption of vitrified brick is less than or equal to 0.5%, which belongs to all tiles.

3. Full ceramic tile: refers to the ceramic tile with water absorption less than 0.5%, that is, the fired ceramic tile with extremely low water absorption.

Tips for choosing tiles:

1. Observe the appearance of the tile, and you can see the flatness and smoothness of the tile surface in good light.

2. Tap the tile and judge by listening to the sound. The clearer the sound after tapping, the better the density and quality of this tile.

3. According to the composition of ceramic tile, generally speaking, the heavier the composition of ceramic tile with the same specification, the greater the density of ceramic tile and the better its durability.

4. Drop test on the back of ceramic tile. After dripping, the slower the water absorption, the greater the density and the better the quality of tiles.

5. Measure the dimensions to see whether the diagonal dimensions of the tiles are consistent, so as to detect whether the shapes of the tiles meet the standards.

6. Lay the tile flat on the ground, so that the middle position of the tile is exposed, and then stand up to see if it will slide or break.

7. Draw on the tile with a marker, and then wipe it with a rag. If it is convenient to wipe, the stain resistance is better.