How to decorate drawers without tenons and grooves?

How to decorate drawers without tenons and grooves?

When decorating and selecting cabinets, take the slide rail as the shoulder handle of the drawer. In the past, our drawers didn't need hardware, and there was no nail in the whole process, so we can build a drawer with long service life, which is what we often call tenon-mortise structure. Today, I will briefly talk about the difference between hardware drawer slide rail and mortise and tenon drawer.

The tenon-mortise structure is connected by the friction of wooden components instead of metal components, which looks like a solid whole. The size and shape of mortise (chisel) and tenon (square) must be consistent in order to achieve the use effect. Drawers use metal slide rails, which can effectively resist impact. When the drawer is opened and closed, it won't suddenly close and it won't make a sound. With a gentle push, some drawers will automatically return to their original state.

Tenon and mortise structure has the same service life as furniture because of its special structure. Hardware slide rails are made of metal, drawers often come and go, and internal materials will change due to external influences. Almost bad materials may be oxidized or aged. After that, the furniture will become loose and its service life will be shortened. Fraxinus mandshurica veneer solid wood wardrobe is easy to be damaged and can only be used for two years. As far as wood veneer is concerned, planed veneer is better than rotary veneer. The way to distinguish the two is to look at the pattern of wood.

In fact, the mortise and tenon structure is really the wisdom of the ancients. However, with the market demand, the tenon-mortise structure has higher technical requirements, and the size and scale of tenon-mortise must be strictly accurate to one percent. The processing difficulty itself is very high and the production efficiency is relatively low. In fact, simple mortise and tenon slide rails can also be used in drawers, and the whole process does not require any hardware. Drawers like this can be made at home. Whether it is wood skin, PVC or pre-coated paper, we should pay attention to whether the leather is flat, bulging, blistering and loose stitches.

Determine the size of the drawer, polish the battens on both sides of the drawer in advance, cut out a groove, and cut off the battens with the same size as the slot for later use. Install sliding wooden strips on the wall and test whether it is easy to pull out with wooden boards. Glue the boards together and a rough drawer model will be completed. Just put the homemade drawers in the card slots on both sides.