Traditional Culture Encyclopedia - Traditional festivals - How to remove the sound?

How to remove the sound?

Question 1: How to delete the sound of the original video in audio and video? Drag the original video to the edit track, select it, right-click and select Split Audio.

Question 2: How to remove a sound with audio echo from a video? The method of removing a certain sound in a video with audio echo is as follows:

1. Turn on audio and video.

2. Right-click the audio track-insert video.

3. Right-click on the video file in the track-divide the audio, so that the audio part in the video is separated from the video into the audio channel.

4. During the audition, find out the starting point of the audio to be deleted and cut it with scissors, as shown in the following figure:

5. Find the destination in the same way.

6. Select the audio part to be deleted-right click-Delete, as shown below:

Question 3: In x6, how to get rid of the sound and click on the material of A/V track, and then right-click to select Mute?

Question 4: How to remove video sound with audio and video X5? The operation steps are as follows.

1. Drag the video to the video track.

2. Right-click the video file-Split audio.

3. Right-click the file into audio tracks-Delete.

Question 5: How to remove the sound of a video material? The first method: drag the video to the video track, right-click the video and select Split Audio, and the audio will be split. Find the audio in the track and delete it. Just re-rendering.

The second method: drag the video to the video track, turn on the mixer, minimize the volume of the video and re-render.

Try it, I hope it can help you.

Question 6: How to remove some sounds from the video? First separate the audio from the video, and then cut out the unnecessary parts.

Question 7: How to only eliminate the voice of speech and keep the background music with sound shadow can clearly tell you that sound shadow is not good. Speak slowly. Audio processing is just a video processing software. Audio processing is not its strong point. Even professional audio processing software such as AU may not be able to do it. It depends on whether the audio file of your video is stereo or not, and whether there is only one person talking. If so, there is still a glimmer of hope, and the noise reduction effect is not necessarily ideal. Because to achieve the effect of silencing, the human voice must be in the middle of the sound field, and the sound in the video is unlikely to stay in the middle of the sound field all the time. If many people are talking at the same time, it is even more impossible to keep their voices in the middle. Therefore, it is basically impossible to completely eliminate it, and it can only be weakened. If many people are talking at the same time, it is impossible to weaken. If your requirement is to completely eliminate the sound, then you'd better give up.

Question 8: How to delete a video sound and attach another audio? If your original video has sound, you can right click-split the audio, separate the audio and delete it, and then fill in the audio you need to add.

Question 9: How to remove some sounds from video with audio and video X5? Find the starting point of this section with sound, click on the material and select "Cut the material", then continue to listen to the next section, pause immediately when you hear no sound, then "Cut the material", right-click on the middle section of the material, select "Split the audio" in the menu, and finally delete the divided material on the audio track.

Question 10: How to delete the sound of video with audio video 1 Open the audio and video and enter its "edit" option-open the video file to be edited.

After opening-Pull the video file to the "Video Track" below. (Note: There are two view modes, one is storyboard view and the other is timeline view, so the timeline view is selected. 2. Right-click the file on the "Video Track"-select "Split Audio" to add an audio file (this is the original sound in MTV or movie) on the audio track below the "Video Track". 3. Just delete the sound files on the audio track. At this time, you can also drag other music into the audio track as background music. )