Detailed introduction of pvc shell construction scheme

When driving in downtown, we sometimes encounter roads or houses under construction, but their construction does not affect pedestrians' travel. It is precisely because of the pvc enclosure on the construction site that the construction site is surrounded by a beautiful landscape. Behind this enclosure, it is actually a mess. The dust is flying on the construction site, and some construction tools are lying around. The appearance of pvc shell solves these problems, and the color is pleasing to the eye and can be used many times. The following is the construction scheme of pvc enclosure in a construction unit.

? Construction scheme of pvc enclosure structure

Shell requirements:

The enclosure installation should be carried out in coordination with the progress of the project and must be completed before the greening trees are transplanted. The enclosure should be placed neatly and firmly, and the placement position should be based on the principle of not obstructing road traffic and pedestrians. In addition, the entrances and exits must be closed to ensure that the construction site is isolated from the outside world, and there should be special personnel to maintain traffic order during construction. Mud, building materials and other sundries are not allowed to pile up near the enclosure area to keep the area clean and tidy.

Shell standard? ：

M 10 cement mortar is used to build a 0.5*0.5 MU 10 shale brick foundation to enhance the wind stability of the enclosure. The pvc shell is 2.5 meters high and 3 meters wide. The construction enclosure shall be beautified, and the enterprise name, safety, quality, civilized construction terms and commercial advertisements of the development project shall be sprayed. It is forbidden to post or scribble junk advertisements. After the enclosure construction is completed, the connection between boards is smooth, and the straight line should be on a straight line; There should be no gap between the plates, that is, the shell in the field is invisible outside the field.

Erection method? ：

Because the existing enclosure is a wrought iron fence, the lower part of wrought iron is a 700-high low wall. Therefore, we choose the outer side of the original fence and the upper part of the low wall, with the help of the existing wrought iron fence as the support system, and adopt the shaped steel plate for enclosure. Fix the shaped steel plate on the fence and wrought iron with self-tapping nails and galvanized iron wires. Install the housing with a spirit level.

Daily maintenance management? ：

The enclosure is managed according to the principle of "who sets it, who manages it". The enclosure on the construction site should be maintained by special personnel to keep it intact, neat, beautiful and undamaged. After the construction is firm, dismantle it, clean up the site, keep the civilized phenomenon and reach the civilized construction standard. Set a red light along the fence, or use a safety reflection cone at regular intervals for night warning.

The Pvc enclosure is easy to move, which perfectly isolates the messy construction environment from the external environment, beautifies the city and does not affect pedestrians' travel. In the pvc enclosure, you can also paste the specific conditions of construction and some precautions, and you can also paste advertisements to decorate your plates with colorful colors. There is a lot of dust and mud in the construction site, but the pvc enclosure is very easy to clean, because its material does not absorb water, as long as it is sprayed with water. This article is about the detailed construction scheme of pvc enclosure, which you can learn about.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~