What is the maintenance telephone number of Schindler gas stove and the after-sales address of Schindler kitchen and bathroom?

1. The high voltage line is disconnected from the ignition needle.

Solution: check the disconnection point of high-voltage line, reconnect it, treat it with high-voltage insulating tape, and then use asbestos sleeve for high-temperature protection; If the high-voltage wire is separated from the ignition needle, cut off the head of the high-voltage wire by 5MM and reconnect it at the tail of the ignition needle;

2. The high voltage output circuit of the pulse igniter is faulty.

Solution: It is likely that the performance of the pulse igniter is poor or damaged, so replace it directly according to the original model;

3. The distance between the ignition needle and the burner metal is too far.

Solution: Re-adjust the distance between the ignition needle and the ignition hole of the furnace head, which is generally about 3-6MM;

4. The ignition needle parts corresponding to the burner ignition holes are seriously dirty.

Solution: use steel wire to pass through the ignition hole to ensure the smooth flow of gas and clean its surface to ensure that the metal exposure will not affect the ignition function.