Temperature setting method of bath water heater

Bath water heater is a necessary household appliance for modern families. When using, the temperature should be set reasonably to ensure that the temperature of the bath water meets the comfort and safety standards. Here is how to set the temperature of the bath water heater:

Step 1: Understand the types and characteristics of water heaters.

Bath water heaters are divided into gas water heaters and electric water heaters. Among them, the gas water heater uses gas to heat, which can provide a lot of hot water quickly; Electric water heaters are heated by electricity and need a long preheating time. However, due to the use of electric heating, the temperature can be adjusted as needed.

Step 2: Select the appropriate temperature range.

The bath water temperature should be set between 38℃ and 42℃. Too low water temperature will make bathing uncomfortable, and too high water temperature will easily burn the skin. For children, the elderly and other people, it is necessary to set a lower temperature, and it is recommended to keep it below 37℃.

Step 3: Adjust the temperature of the electric water heater.

When using the electric water heater, the temperature of bath water can be controlled by adjusting the temperature of the water heater. First turn off the power switch of the water heater, and then turn the temperature knob on the water heater with a wrench to make the temperature indicator point to the required temperature range.

Step 4: Adjust the temperature of the gas water heater.

The temperature adjustment of gas water heater is relatively simple, and users only need to adjust the temperature control knob on the water heater according to the instructions.

Step 5: Adjust the temperature of the faucet.

After determining the temperature of the bath water heater, if the water temperature is still not comfortable enough, you can change the water temperature by adjusting the faucet. The water outlet of the water heater is equipped with a faucet that can adjust the water temperature. When taking a bath, the ratio of hot water to cold water can be adjusted as needed to obtain a suitable water temperature.

In short, when setting the temperature of the bath water heater, we should comprehensively consider the types and characteristics of the water heater, the different needs of users, the temperature of the external environment during bathing and other factors to ensure that the temperature of the bath water is appropriate, comfortable and safe.