How to disassemble the range hood

The range hood is used very frequently for a long time, which will inevitably leave a lot of oil stains in the range hood, fan, flue and other areas, forming oil stains. If it accumulates for a long time, it will also affect the effect of the oil absorber. Therefore, it is necessary to disassemble the range hood regularly for cleaning. There are many kinds of range hoods on the market. The following small series introduces various disassembly methods of range hoods for everyone.

1. Disassembly methods of various range hoods

First, turn off the power supply of the range hood, first remove the "oil collecting cup" at the bottom of the range hood, and unscrew and remove the funnel filter screw with a screwdriver. After removing a layer of coarse filter screen, you can see that the coarse filter screen of the range hood is fixed with three screws. Loosen the three screws clockwise first, and then remove the coarse filter. Then remove the internal fan and use the external hexagon wrench, which is more convenient to remove. Finally, remove the fan of the ventilator wheel. General fan impeller is fixed with big nut. Release it by hand and then remove it, and the removal work is completed.

Second, how to disassemble and clean the side range hood?

1. First, loosen the cover plate of the net cover and the screws on the net cover, and unscrew the cover plate and the net cover.

2. Then unscrew the fastening screw of the wind wheel and unscrew the wind wheel.

3. Soak the removed parts in warm water containing neutral detergent, and then dry them with a soft rag.

4. Soak the rag in warm water with a small amount of neutral detergent, dry it, scrub the dirt in the volute cavity with the rag, and finally wash it with clear water and dry it.

5. In the reverse order of disassembly, return and install the removed parts according to the original road.

6. After installation, check whether the oil circuit on the electrical appliance is unblocked and whether the sealing ring on the volute has been sealed.

7. Please clean the wind wheel, volute and oil drain pipe regularly according to the instructions.

Conclusion: Here, I will introduce the disassembly methods and related knowledge of various range hoods, hoping to help you. For more information, please keep an eye on Qijia. Com information platform.