How to shoot Huawei watchd?

1. Uncover the outer packaging of the toughened film of Huawei watches. The set includes 3 pieces of film (usually 2 pieces), dust removal sticker and a scratch card.

2. If you buy a new watch, you will usually cover it with an ordinary protective plastic film and need to take it off. If the film has been pasted, the old one needs to be replaced with a new one and removed.

3. Wipe the watch screen with the dust removal sticker in the package. Seen from the side, there is no obvious foreign body adhesion on the surface. If the foreign matter cannot be erased, it can be wiped with a cloth, which can generally remove the foreign matter (if it is a new watch, it is recommended not to wipe it after tearing off the factory mucosa, otherwise it will get dirtier and dirtier).

4. Take out the film, usually two plastic films with labels sandwiched between them. When using, first completely remove the plastic paper with the serial number of 1.

5. Use the scratch card in the suit to squeeze out the bubbles after pasting.

6. Let the film stick to the screen naturally, press every corner with a scratch card through the plastic paper, and squeeze out the bubbles with the scratch card.

7. The film is finished.