The manual process of making two wires.

The tutorial for making roses with two threads is as follows:

Material preparation: two iron wires and pliers.

1, concave profile.

2. Lead the wire in and make two small circles.

3. Connect the wire to the back.

4. Fold the leaves.

5. Cut off the remaining thread and the thread rose will be finished.

Matters needing attention in manual thread use

1, select the appropriate wire.

Select the appropriate wire according to the size and complexity of the product. Fine threads are suitable for making small and detailed works, while thick threads are suitable for making large-scale structural works.

Step 2 use the right tools

Prepare necessary tools, such as scissors, pliers, files, etc. Make sure that these tools are sharp and tidy, so as to cut and manipulate wires conveniently and accurately. It is best to use anti-bite pliers or hand mill to prevent injury.

3, understand the characteristics of the wire

Iron wire is soft and elastic, but it is also easy to deform. Therefore, special attention should be paid to maintaining the shape and structure of iron wire in the production process.

4. Avoid twisting or winding wires frequently.

This may cause the wires to be deformed or broken.

5. Safe operation

In the production process, we must pay attention to safety to avoid scratching our hands or other parts.

6. Selection of iron wire hardness

Different iron wires have different hardness. If you choose hard iron wire, it may be difficult to shape during the production process, and you may also scratch your hand. Therefore, it is necessary to select the iron wire with appropriate hardness according to the specific application.

7. keep your hands clean

Before using the wire, keep your hands clean to avoid grease or impurities polluting the wire and affecting its quality and service life.

8, the correct storage of iron wire

If the wire is not used temporarily, it should be stored in a dry and ventilated place to avoid damp and high temperature environment, so as not to cause corrosion or bending deformation.

9. Check the wires regularly.

During the manufacturing process, the wires should be regularly checked for bending, deformation or damage, and if so, they need to be handled or replaced in time.

10, pay attention to safety

When using wires, avoid being scratched by sharp corners or caught by bent wires. If you need to bend the wire, you should use tools or hands to bend it, and avoid holding it directly with your hands.