How to install a fishing float

Question 1: How to assemble a fishing line, rod, and float? Main line: Cut the line according to the length of the rod, and then string the small pieces in the following quantity and order: two space beans, one float seat, three space beans, one lead reel seat, one space bean, and finally tie an eight-ring at the end of the line. Fold a piece of double-stranded line of about 15 centimeters at the end of the other line, knot both ends, leaving a distance of about 7-8 centimeters in the middle of the two knots, use two fingers to pass through the double-stranded line from the middle of the two knots, and then circle back from the outside, so that the double-stranded line will be a live button, and then it can be used behind the dead knots on the nylon ropes on the pole pole tip of the fishing rod. After use, you can pull the top knot to unlock it.

Fishing rod: The nylon rope at the tip of the rod is tied with a knot to fix the fishing line.

Subline: After tying two hooks, tie a knot in the middle of the line, with a 1-1.5cm difference in the length of the line between the two ends of the knot. When used from the main line of the eight ring through the tie a dead buckle can be.

Newcomers are not recommended to tie the line themselves, it is best to ask the owner to do a good job in the fishing tackle store to use, with familiar with it and then do it yourself.

Question 2: How to install a fish float I do not know what kind of environment you want to fish sea fishing or river fishing

We recommend that you buy an automatic float for a wide range of uses, very trouble-free

Question 3: How to install a fish float I do not know what kind of environment you want to fish sea fishing or river fishing

We recommend that you buy an automatic float for a wide range of uses, very trouble-free

Question 4: How to install the float The sensitivity of the float plays a key role in improving the efficiency of fishing, so it is necessary to choose a good float and at the same time to adjust the float. Every vertical float has a grid of color symbols on the end of the float, separated by small black ribbons in the middle, each grid is one eye, no matter what color, usually from the top of the float to count down, how many grids is how many eyes. Float sensitivity, but not that no mess when, what the situation, the more spirit the better. The sensitivity of the float response is broadly categorized into 3 ranges: smart, medium and dull. The medium category is applicable under normal circumstances, and is also the main and heavily used; the spirit and blunt category is in special circumstances, only need to adjust a little more spirit or blunt. Therefore, when installing and calling floats, appropriate adjustments can be made according to the weather and needs. The sensitivity of adjusting 4 eyes to fish 2 eyes and adjusting 3 eyes to fish 1 eye or adjusting 5 eyes to fish 3 eyes is the same, belongs to the category of the middle, in general the sensitivity is moderate, but in comparison, adjusting 4 eyes to fish 2 eyes superiority is a little more, so the people who use this method of adjustment is the most.

First, install the float.

1, empty fishing is not in the end, you can adjust the lead, so that the float dew full half of the number of eyes, to 12 eyes float, for example, reveal 6 eyes can be.

2, double hooks hanging bait to find the bottom, you need to adjust the height of the float, is floating more than half of the full number of eyes, that is, exposed to the surface of the water for more than 6 eyes, which means that double hooks have been to the bottom.

3, double hooks hanging bait, need to adjust the height of the float to show the surface of the water 3 eyes is appropriate, then you can fish. The two hooks in the water under the state of one hook lying on the bottom of a hook lightly touch the bottom, belong to the more sensitive state. If you want to continue to improve the sensitivity, you need to reduce the number of eyes on the surface of the float, and if you want to fish bluntly, you need to increase the number of eyes on the surface of the float.

Second, adjust the drift.

Anglers commonly used to adjust 4 eyes fishing 2 eyes, specific methods of operation such as.

1, first pull the end of the drift as close as possible to the lead seat, so that the length of the hook to the top of the float is less than the depth of the water. Then increase or decrease the lead on the lead seat, so that the float is exposed to the water 4 eyes. At this point both the hook and the lead drop are in the middle of the water, rather than sinking to the bottom (this fishing method is called pendant fishing). When tuning, roll more lead on the lead holder. Put into the fishing point, if the float is completely submerged in the water, it means that the lead is too heavy, you can cut some, until the float is exposed to the surface of the water 4 eyes, the position of the lead pendant is just hanging in the water, the fishing line is straight and not bending until the debugging of the float work is completed.

Third, adjust the spirit and blunt

1, spirit and blunt. Need to remember two points: First, the more the number of adjusted eyes the more sensitive, the less the more sluggish. Secondly, the more the number of fishing eyes the more sluggish, the less the more sensitive. The increase or decrease in the number of adjustments and the increase or decrease in the number of fishing strokes go hand in hand. If you adjust and fish with spirit, the float response will be more spirit; if you adjust and fish with bluntness, the float response will be more blunt. If a spirit of a blunt, the effect will cancel each other out, so the effect is low or even no effect, in fishing in general should not be used.

2, drift mode. The only way to do this is to use the same method that you would use if you were in a special situation. When the air pressure is low, the water quality is not good, the fish appetite is not good, the fish feeding action is slow, light, often the float did not respond and the bait has been eaten up the phenomenon, which shows that the float response is slow. At this time should be timely to reduce the fishing eyes, the original 2 eyes to fishing 1 eye or half an eye, or even drift tail fish water surface flush. If it is still not agile enough, you can reduce the lead bit by bit. On the contrary, if the weather is good, the temperature is comfortable, the air pressure is normal, at this time the fish appetite is quite good, found that the bait due to feeding too hard, the impact of the flow of fish will make the hook, bait movement, often the fish have not yet bait bites into the mouth, the float appeared to be sinking and floating, resulting in lifting the rod is not fish. At this time we have to increase the number of fishing eyes, fishing 2 eyes into fishing 3 eyes or 4 eyes, or even more eyes. If it does not work, you can increase the weight of the lead.

Fourth, practical application.

Usually, after the angler arrives at the fishing ground, he should first adjust the drift according to the normal situation using the method of adjusting 4 eyes to fish 2 eyes. If you encounter problems in the process of fishing, you can analyze the situation according to the fish, water conditions, weather and other specific conditions, and make a judgment after adjustment. If you need to make adjustments, do not change the number of strokes (i.e., do not change the weight of the lead drop), but move the float up and down to increase or decrease the number of strokes. If this does not satisfy your needs, then you will have to increase or decrease the weight of the lead, change the setting, or adjust the amount of fishing.

Question 5: How to install a float on a fishing rod First, put the conical float seat, with the big head towards the rod tip and the small head towards the hook on the fishing line, and then put the bottom of the float on the float seat from the big head *** Float seat can be. In order to float less movement, now usually use space beans fixed, that is, first on the fishing line to wear two space beans, then wear the float seat, and finally wear two space beans.

Question 6: How to install this fish float Insert the tip of the float into the black one inside the lead holder

Question 7: Please tell me how to install the fish float to the fishing line, please answer, it is best to have a picture, I bought a float yesterday, it seems that you still need to what to put on the line to get the line needs a float seat. The drift is inserted into the holder. Two space beans on either side of the float seat on one side.

Question 8: How to install the float is considered correct How to install the float and on the other side of the reservoir in other Shenyang anglers also have a lot of catch, they have been to the upper reaches of the reservoir, dripping across the source, where the road to catch three fresh fish, two dogfish. When is the best time to fish, the mastery starts from here. 4 and a half hours, we **** caught 7 black spotted dogfish, 3 fresh fish, running fish more than a dozen. First wish in this life: to take my grandfather fishing on the sea. How to install a float tomorrow island fishing, small Japanese radicals have the guts to grin to death you. 2012 latest fishing video let you quickly learn to fish, small Japan hurry to die alive is a shame. Fishing is China's support smash Japanese goods ..... A recent favorite phrase: no money on the doorstep fishing, money on the group island fishing! Tangled ...... today came to Longyan's Guantian, four people ... four people ate a hundred, fish soup, steamed fish, the last plate of Chinese cabbage, bunker ... the last is not finished, sleep, driving all the way quite sleepy to say. Good miss aunt and uncle you guys, so want to see you, remember before I especially like to eat uncle do and sweet and sour pork ribs, aunt always put my favorite dishes to my bowl, she always like happy in front of friends and family that I am her daughter, oh so thrilling ah just now, it is not easy to do times the fish, not easy to do, or sweet and sour, the results just eat two mouth stuck, stuck me, or vinegar to save my life, almost go to the hospital I want to eat casserole, I want to see you, I want to see you, I want to see you. I almost went to the hospital I want to eat casserole vegetarian meatballs. I would like to eat a casserole of vegetarian meatballs. When can I arrive ah, there is a peer how to install a float no longer can island fishing, damn little Japan! National Day to prepare and Mom and Dad ~ En hum, although *** Japanese goods, but the Japanese goods seem to be ..... Ahem, my family's Hiroshima car ah! A little impulse. I want to go to the island. The same shoes to go raise their hands.

Question 9: How to install a fishing buoy Waterfront site please teach, or look at the masters of the video

Question 10: How to install a sea fishing drift? Floating Iso Apo's components

wzscj/.... .4

The usual recreational fishing commonly used is the standing drift line set: as follows

1: Main line - carp (grass) fish 1.5 # to 3 #. Carp 0.8# to 1.2#

2: Subline - carp 0.6# to 2.5#. Carp 0.4# to 1#, the length of 200MM to 250MM

3: O-ring - to play a role in connecting and have a certain cushioning

4: small lead pendant - wrapped a little bit of medical tape on the subline and then add the lead skin (sometimes without a small pendant). Sometimes, if you don't use a small pendant, it becomes a single line suspension fishing)

5: Hooks - Take the Disney hooks as an example, 3# to 12# for carp (grass) and 1# to 5# for crucian carp

6: Standing Drift - Streamline hard-tailed drifting (the hard-tailed float is less lead-eating). Smaller eat lead less) the finer the drift tail the better. If you can't see the drift from a distance, you can add a set of 2 to 3 centimeters of hollow drift tail (available at tackle stores)

Adjustment of the line set: Don't add a small pendant first to make sure that the hook is in half-water, use a big pendant and adjust it to 4 to 7 meshes and then add a small pendant and adjust it until the tip of the drift tail is flush with the water surface. When fishing, the drift tail out of the water 1 eye to 3 eyes (this is only a basic method of adjusting according to the fishing point of the fish and water conditions).

Personal habits are for reference only

I am using the teeth.

I use a small drop when I use a worm or a red worm as bait because the lightness of these baits is too small to be reflected in the eye of the drift.

I also use a small drop when there are a lot of small fish in some fishing grounds

And also when fishing for slippery fish

bbs.fish/read.php?tid=23801

I would recommend using an Awa and if you want to catch a big fish, you can use a Roadrunner or an Awa.