Job responsibilities of power plant inspectors

Article 1: Job specification for centralized control inspectors in power plants.

1 range

This specification specifies the job responsibilities, post standards and qualifications of centralized control inspectors.

This specification is applicable to the position of centralized control inspector.

2 job responsibilities

2. 1 Function scope and work content

2. 1. 1 Responsible for the monitoring, adjustment, maintenance, inspection, patrol and operation of external equipment and systems in the professional control room.

2. 1.2 Correctly execute the operation orders issued by the attendant at the next higher level.

2. 1.3 seriously implement the system of working ticket and operation ticket, and correctly switch the operation mode of thermal system and electrical system.

2. 1.4 Correctly analyze and judge abnormal working conditions and handle unexpected accidents.

2. 1.5 patrol regularly, report the defects of equipment and systems in time, and take corresponding measures to register the defects.

2. 1.6 Fill in all kinds of records and logs carefully, with detailed contents and clear handwriting.

2. 1.7 Make accident prediction and abnormal analysis.

2. 1.8 switch or test the equipment system under its jurisdiction regularly.

2. 1.9 complete the training work such as technical question and answer, examination explanation and anti-accident drill issued by the unit leaders. Study hard professional skills and improve their own quality.

2. 1. 10 Do a good job of shift change and production report.

2.2 Job responsibilities

2.2. 1 The duty officer is responsible for the safe, economical and stable operation and operation of the equipment system under his jurisdiction.

2.2.2 Responsible for implementing safety measures according to the requirements of working ticket and operation ticket.

2.3 Work cooperation relationship

2.3. 1 Accept the leadership of the unit leader at work, accept the command of the unit leader, controller and assistant controller in operation, strictly implement its operation orders and report in time.

2.3.2 Major operations shall be supervised by unit leaders and assistant dispatchers.

2.3.3 Safety shall be supervised by safety supervisors at all levels.

2.4 civilized production requirements

2.4. 1 Responsible for the supervision, management and cleaning of civilized production in the responsible area. Ensure that the equipment is true in color and clearly marked, and the placement of related items meets the requirements of fixed management.

2.4.2 Actively cooperate with maintenance personnel to control equipment leakage.

2.4.3 Dress as required and wear work marks.

3 post standards

3. 1 Political thoughts and professional ethics

3. 1. 1 Adhere to the Four Cardinal Principles, support the Party's principles and policies, be politically consistent with the CPC Central Committee, seek truth from facts, keep close contact with the masses, be honest and be law-abiding.

3. 1.2. Be loyal to their duties, have a strong sense of professionalism and responsibility, be loyal to their duties and forge ahead.

3.2 Necessary knowledge

3.2. 1 Be familiar with the knowledge of drawing all system diagrams, main equipment parts diagrams and structural diagrams of this major.

3.2.2 Understand the professional operation procedures.

3.2.3 Understand the basic principles of fluid mechanics.

3.2.4 Understand thermodynamics and the basic principles of conduction, convection and radiation heat transfer.

3.2.5 Understand the general knowledge of electrician and thermal engineering.

3.2.6 Understand the stability and continuity of fluid and the basic principles of laminar flow, turbulence and cavitation.

3.2.7 Understand the mode and working principle of boiler water circulation.

3.2.8 Understand the operation and maintenance, abnormal situation judgment and accident handling knowledge of the professional equipment.

3.2.9 Understand the basic knowledge of fire fighting and the use of fire fighting equipment.

3.2. 10 Understand the purpose, usage and precautions of common tools.

3.3 Technical Regulations for Production

3.3. 1 Be familiar with and implement the relevant provisions in the Electric Power Safety Work Regulations, Technical Management Regulations of Electric Power Industry, Accident Investigation Regulations of Electric Power Production, Power Grid Dispatching Management Regulations, Production Dispatching Regulations, Electric Operation Regulations, Electric Operation Regulations, Steam Turbine Operation Regulations and Boiler Operation Regulations.

3.3.2 Understand the relevant contents of Technical Management Regulations of Electric Power Industry and Safety Supervision Regulations of Pressure Vessels.

3.4 Skills requirements

3.4. 1 Understand the schematic diagram and structure diagram of common components, and write down the professional system diagram by hand.

3.4.2 Contact and communicate with clear, concise and accurate technical language.

3.4.3 Regularly check the professional equipment system, find defects in time and handle them correctly.

3.4.4 Correctly implement safety measures before equipment and system maintenance, and conduct operation acceptance after maintenance.

3.4.5 Be able to operate and adjust under various working conditions.

3.4.6 Cooperate with the thermal test and adjust the equipment to the best test operation state according to the requirements of the test scheme.

3.4.7 Can switch the equipment under the jurisdiction of this major.

3.4.8 Correct use and maintenance of testing instruments and meters used in this specialty.

3.4.9 Be able to correctly analyze and judge the causes of equipment failures in this specialty and handle them quickly and correctly.

3.4. 10 Do a good job in anti-corrosion and anti-freezing of the shutdown unit.

3.5 qualifications

3.5. 1 education level. Have graduated from electric power secondary school or technical school or above.

3.5.2 Work experience. Generally, you should have more than 2 years of practical work experience in this major and pass professional training.

3.5.3 Professional and technical qualifications. Have the primary professional and technical titles of engineering series.

3.5.4 Physical condition. Good health, no diseases that hinder the work of this position.

Centralized control, shift work every day, no holidays, including Spring Festival.

Inspectors will regularly check the equipment and deal with equipment defects.

The operator adjusts the operation parameters of the unit in the centralized control room.

Part II: Responsibilities of Equipment Patrol Inspector

In order to further strengthen equipment management and combine group inspection with special inspection, the Ironmaking Plant specially appoints full-time inspectors to maintain electrical appliances and pliers to ensure the normal operation of machinery and electrical appliances. The duties of the inspectors are as follows.

1, the inspector must be familiar with the performance, technical requirements, installation location and operation of all equipment in the ironworks.

2. The inspector should carefully check every day, and write down the inspection time and existing problems on the inspection record form, and hand them over to the equipment manager before leaving work every afternoon.

3. The inspector shall specify the inspection route, inspection time and inspection content.

4, the inspector must be equipped with good tools during the inspection, found small problems handled in time, found big problems, timely report to the relevant leaders.

5. The inspector has the right to instruct the maintenance or electrician to deal with the hidden dangers found without affecting the production, and each team has the right to impose a fine on those who fail to deal with the hidden dangers found or deliberately delay.

6. If the inspection is not serious or omitted, the inspectors shall be responsible for the losses caused by equipment failure or major equipment accidents.

7. The inspector has the right to supervise the inspection work of each section and each team.

Chapter III: Inspection post responsibilities and assessment methods; Responsibilities and assessment methods of inspection posts

I. Purpose

Establish and improve the responsibilities and assessment regulations of inspection posts, standardize the work content and requirements of inspection posts in each process, and link the quality of work with economic benefits through performance appraisal, so as to mobilize the subjective initiative of inspectors, give full play to the functional role of inspection, change the quality control work from passive post-processing to active pre-inspection and prevention, control quality problems in the bud, and reduce or even eliminate the occurrence of unqualified products, thereby reducing the frequency of rework and repair in production, promoting and accelerating the production cycle, and reducing the number of products.

Second, the job responsibilities

65438+

2. Track and confirm the quality of raw materials used in each process. If any abnormality is found, it should be fed back in time and handled properly according to relevant procedures.

3. According to the process and technical requirements, be responsible for testing the product quality of each process machinery under its jurisdiction.

3. 1: extrusion process: the inspection contents of extrusion process include sampling inspection of semi-finished products' outer diameter, length, appearance, weight, finished products' outer diameter and extrusion thickness, and supervision of the use of spark machines in various extruders.

3. 1. 1: The first product of each extruder platform must be signed, and mass production can only be carried out after the first inspection is qualified.

3. 1.2: The finished coil products are a batch with the same model, specification and color according to the same machine per shift. The number of spot checks on conductor wire diameter and extrusion thickness of each batch shall be no less than 3% of the total batch (at least 3 turns). The length and weight of each batch shall be confirmed at least 1 time.

3. 1.3: Extrusion processes such as cable insulation, internal protection and external protection must be 100% inspected, including thickness, eccentricity and appearance defects. It is required that the extrusion thickness of the head and tail of each extruded cable must be peeled off, and the on-line outer diameter of each cable should be measured at least three times and recorded.

3. 1.4: During the insulation process, check whether the wires used are consistent with the flow card of the previous process and the plan sheet of this process, whether the insulation color meets the process requirements, and the number of meters produced after insulation extrusion.

3. 1.5: For sheath extrusion, it is necessary to check whether the model, specification, voltage grade, implementation standard and production length of the finished product conform to the production plan, and confirm the sheath length (m) as required. 3: 1.6: The supervision and inspection of the use of spark machines on each extruder should be no less than 1 time per hour.

3.2: Wiring and Packaging Process

3.2. 1: When laying cables, first confirm whether the insulation length of each coil is consistent, and whether the used wire core is consistent with the flow card of the previous process and the production plan of this process.

3.2.2: Check the frequency and quality of each machine during cable winding, and each cable shall be at least 1 time; The frequency and quality records of insulated cables of 240mm2 and above shall be recorded at least 3 times for each cable.

3.3: Stretching and Stranding Process

3.3. 1: The wire drawing process inspection includes the sampling test of product appearance, outer diameter, mechanical properties and electrical properties. During wire drawing, the inspection frequency and quality records of each machine shall be no less than 5 times per shift, and the sampling rate of wire drawing monofilament diameter shall be no less than 20%. The mechanical properties and electrical properties of the drawn monofilaments shall be sampled on the same machine, and each specification shall be sampled at least 3 times per shift.

3.3.2: The inspection of the stranding process includes sampling inspection of appearance, structure, stranding direction, pitch, section and resistance, and the inspection frequency and quality record of each machine are required to be at least 3 times per shift.

3.3.3: The starting line of the stranding machine must be signed by the first piece. If the stranded section or resistance does not meet the control requirements, the production personnel shall be informed in time to make adjustments. The tail of each bottom conductor must be sampled and retested.

3.3.3.4: For stranded conductors below16mm2 and meeting international requirements, the tail resistance of each lower conductor must be re-measured after the first inspection.

3.5: Extrusion Process

3.5. 1: Responsible for checking whether the wires used are consistent with the flow card of the previous process and the production plan of this process.

3.5.2: Be responsible for the appearance quality inspection and line diameter measurement of the products in this process, not less than 1 time per hour, and truthfully record the measurement time, measurement length and position, and recheck the measurement records of the machine.

3.5.3: Be responsible for the inspection of process execution in this process. The temperature and linear velocity of extruder and fluidized tube should be recorded at least 65438 0 times a day, and recorded again when it changes. The material usage record shall be recorded 1 time every day, and shall be re-recorded in case of any change.

3.5.4: Be responsible for the start and stop of this process and the sampling and inspection of the next product.

4. According to the process and technical requirements, be responsible for the confirmation of product quality and the supervision of quality discipline in each process within the jurisdiction.

4. 1: The products of each process must be inspected and confirmed within 30 minutes after disembarkation, and the quality mark should be stamped on the process card as required. Non-conforming products should fill in the feedback form in time and send it to the production department.

4.2: Strictly supervise the quality discipline, and products that have not been inspected or stamped with unqualified seals shall not flow into the next working procedure. Supervise and check the filling of each process card as required.

4.3: Follow up and verify the quality treatment of nonconforming products according to the review requirements, and record and feedback truthfully.

Third, the performance appraisal method

1. Inspector's salary is divided into two parts: post salary and performance appraisal salary. Post workers in various positions

The information is classified as: patrol post in conductor workshop and patrol post in wire and cable workshop. The performance pay is based on the monthly copper consumption (the monthly copper consumption exceeds the base 1 ton 10 yuan, and the performance pay is determined according to the percentage of the actual monthly copper consumption to the base).

2. Evaluation method

2. 1 The post salary of each inspector is fixed, and the performance appraisal salary is divided into 10 points on a monthly basis, and the performance salary is calculated and paid on a monthly basis.

2.2: If the cumulative monthly score is less than 6 points for three times during the year, it will be treated as laid-off or transferred from this post.

2.3: If the monthly performance penalty exceeds 10, it will be treated as laid-off or transferred from this post, and no fixed salary will be deducted.

3, assessment content

3. 1: Work and rest evaluation

3. 1. 1: No vacation is allowed in principle unless there are special circumstances. Employees should be employed in Man Qin, and overtime pay is not paid on sundays and holidays stipulated by the company. The fixed salary is calculated and paid according to the actual attendance days per month.

3. 1.2: Daily schedule: 8:00 to 17:30 in the day shift, 0/7: 30 to the next day 1:30 in the night shift, and 8:00 to 17:30 in the Sunday shift. 5 yuan/person who needs to work overtime due to work reasons. The night shift allowance and Man Qin Prize shall be assessed according to the relevant regulations of the company.

3. 1.3: 0. 1 minute/day (times) will be deducted for asking for leave, 0.2 minutes/time for leaving early, 0.5 minutes/time for absenteeism (within 30 minutes to 60 minutes).

3.2: Work Quality Assessment

3.2. 1: If the external quality complaint is confirmed as quality responsibility, 5 points will be deducted each time.

3.2.2: If the internal complaints in the workshop are confirmed to be errors or inadequacies in the central control, 1 minute/time will be deducted.

3.2.3: 1 minute will be deducted for disobeying the work arrangement of the leader.

Conductor control part:

Article 4: Job Responsibilities of Power Plant Operation Job Responsibilities of Power Plant

First, the long-term value:

1, correctly implement the operation mode approved by the deputy general manager of production.

2. Be responsible for the safe and economic operation of the full value, obey the superior dispatching command, and strictly implement the active and reactive power dispatching curves.

3, in accordance with the requirements of the regulations, comprehensive leadership and command the long-term value of operation and accident treatment.

4. Serve as the working ticket licensor stipulated by the company and the test host stipulated by the operation regulations. Supervise the personnel on duty to carry out important operations and accident treatment to achieve correctness.

5, lead the full-time staff to play the role of security officers, trainers and other personnel, do a good job in the safe and economic operation of the team and personnel training.

6, lead full-time staff to do a good job of cleaning and hygiene.

7, responsible for pays special attention to the succession, a good job before and after the meeting.

Second, the principal value.

1, fully responsible for the safe and civilized production and economic operation of each system of this unit; When the shift supervisor is not on site, exercise his functions and powers.

2, responsible for coordinating the work of the unit, responsible for coordinating the operation of the machine, furnace, electricity, fuel and chemistry.

3, responsible for the start and stop of major operations of the unit and operation monitoring.

4, responsible for the exception and accident treatment of the unit, under the supervision of the long-term value leadership, responsible for directing the operators to complete the accident treatment.

5. Be responsible for providing technical training and business guidance to the crew, and assessing the work quality and labor discipline of the crew.

6, directly accept and execute the command of the long-term value, if in doubt, it must be clearly put forward immediately, if the long-term value insists, it must be executed according to the command; If personal and equipment safety is endangered, it shall be refused and reported to the superior immediately.

7, accept the long-term value of specific work arrangements and business guidance. Specific work arrangements and business guidance for deputy and below operators.

Third, the deputy value:

1 is the assistant of the main value, responsible for assisting the main value to complete the safe and economic operation of the unit; When the shift supervisor is not on site, exercise the functions and powers of the shift supervisor.

2. Assist the long-term value to complete the monitoring and adjustment of the unit, and guide and assist the inspector to complete its operation and inspection.

3. Cooperate with principal value analysis, deal with hidden dangers, anomalies and other unsafe factors in unit operation, adjust parameters and operation modes, and assist principal value to complete accident treatment.

4. Accept the specific work arrangement and business guidance of the principal value. Make specific work arrangements and business guidance for inspectors.

Fourth, the inspector

1, responsible for local operation and adjustment; Responsible for the patrol inspection of unit equipment and systems.

2. Responsible for the operation inspection and maintenance of electrical, mechanical, furnace and fuel equipment, as well as the operation of the fuel delivery system in the plant.

3, responsible for the management of instruments and civilized production.

4, assist the deputy value to do a good job of all kinds of records.