The two water outlets of the water heater, one is connected to the shower, and the other is to be installed in the sink. How to install the sink with faucet?

The water heater has two water outlets, one is the cold water inlet and the other is the hot water outlet. If it is necessary to lead the hot water from the water heater to the sink, it is necessary to purchase a cold and hot water mixing faucet for connection, so that the faucet outlet of the sink can be suitable warm water. The installation method comprises the following steps

1. Learn about the two water outlets of the water heater first. One is the cold water inlet, which will be clearly marked, such as blue (blue dot below) or cold water, and the other is the hot water outlet, which is also clearly marked, such as red (red dot below) or hot water.

2. Buy a U-shaped mixing valve and connect it to the hot and cold water inlet and outlet of the water heater. Be careful not to twist hard during installation, and each threaded interface should be waterproof and leak-proof.

3. There are two cold and hot water inlets and outlets on the back of the U-shaped mixing valve, and the cold water pipe at home is connected to the cold water inlet on the back of the U-shaped mixing valve.

4. Connect the shower hose with the main water outlet of the U-shaped water mixing valve to complete the installation of the shower nozzle.

5. If you need to connect the hot water of the water heater to the faucet of the sink, you need to buy a cold and hot water mixing faucet, which also has two connecting nozzles, one for cold water and the other for hot water.

6. Remove the hot water outlet plug on the back of the U-shaped valve, connect it to the hose of the mixing faucet in the sink, and then connect the cold water pipe at home with the cold water hose of the mixing faucet, thus completing the connection of the mixing faucet in the sink.