How to install home decoration hangers?

A shaker installation: shaker is generally installed on the right side of the balcony to facilitate the habitual use, the distance from the ground is generally 120cm, according to the height of the user to decide. Fixed with expansion screws.

The installation of the second top seat: in the balcony to be installed on the top of the balcony, with a steel ruler to measure the diameter of the balcony top lighting, and then in the light on both sides of the 15cm-30cm between the installation of an installation of marks (length according to the size of the balcony to decide). Then measure the distance between the mark and the edge of the balcony, according to this distance to determine the width of the top seat installation. Then measure the length of the balcony as the center of the lamp, according to the length of the drying rod to determine the lamp on both sides of the flat 80cm-100cm, and then with the width of the measurement of the distance there are four intersections, these four intersections is the top seat of the hanger installation position. After the position is determined, drill holes with an electric drill, after drilling with expansion screws to fix the four top seat (such as pole length over the conventional size, the distance to do the corresponding adjustment).