Generally, fishing line groups have double hook lines. How to tie the eight-character ring of double hook line?

Generally, fishing line groups have double hook lines. How to tie the eight-character ring of double hook line? Prepare special tools in advance: prepare double hooks, wire dividers, floating seats, electric hook binding devices, plastic clips and iron clips. Knot: Knot the double hook with an electric knotter. The distance between the front and rear hooks is 5cm. Fold a suspension point and install a floating seat. Winding: make a loose button on the sub-wire, and the double hook will be wound two or three times respectively. If fixed with an iron clip, a hole will be created, and then the double hook will be coiled up. Knotting: pass the floating seat around the suspension point through the hole and fix it, remove the iron clip and tighten the thread end.

1. Sub-thread knotting method Loop knot of inner and outer threads: first, define the distance between double hooks, fold the sub-thread, and after the generated loop is wound for 2-3 times, thread the sub-thread out of the inner hole, and finally gently pull both sides of the sub-thread to make the sub-thread firmly form a knot.

Loop tying of inner thread: first, make clear the distance between the double hooks, fold the bottom thread in half, then wrap the bottom thread around the generated loop for 2-3 times and pass through the inner hole, and finally gently pull both sides of the bottom thread to make the bottom thread firmly knot.

Step 1: Adjust the distance between double hooks for knotting the sub-thread, then fold the sub-thread and pass through the splayed ring. Step 2: Fold the sub-wires and thread them out of the 8-shaped ring, then wrap the remaining sub-wires and thread them out of the ring. Step 3: the double hook passes through the ring generated by folding the sub-wire, and then gently pull the double hook to fix the sub-wire on the splayed ring.

Third, the first step of knotting the sub-line: the double hooks of knotting the sub-line have been fixed, and the eight-character ring can be worn out immediately without adjusting the distance between the double hooks. Step 2: Winding the sub-line passing through the eight-character ring from top to bottom for 2-3 times, and then passing through the generated ring. Step 3: Hold the bottom line coming out of the circle with your index finger and thumb, gently push one end of the double hook and gradually tighten the bottom line.

Fourth, do the double hook lines have to be connected? Double hook and auxiliary line must be connected in a reasonable way. In the case of connection, the binding method is generally used. In the case of tying, try to tie it firmly, and try not to let the double hook and the auxiliary line get entangled together, so as not to damage the actual effect of fishing in the future.