Disassembly method of self-made hand washing machine

Hand washing machine is a traditional way of washing clothes. Its advantages are energy saving, environmental protection and simple operation. However, because long-term use will test the life of the machine, it may be necessary to disassemble, clean or repair the machine. The following is the disassembly method of the self-made hand washing machine for your reference.

1. Put the washing machine on a spacious and flat workbench, and remove the crank bracket and crankshaft with a spiral cutter.

2. Remove the outer shell of the clothes cylinder according to the position sequence, and then remove the clothes cylinder.

3. Put the clothes tube into the washing basin, soak it in washing powder and water, and clean it.

4. Remove the water valve lever of the washing machine and clean the water hole inside the faucet with a toothbrush. Then, install a new O-ring on the faucet to prevent water from dripping.

The water distribution pipe of washing machine is generally small, so the hard pipe connecting the faucet and the water valve rod must be carefully removed to ensure that the pipe will not be broken or your faucet will be damaged.

6. Remove the pump and filter, unscrew it, and then clean it with warm water and washing powder.

7. After cleaning, reinstall and tighten the connector.

8. Then reinstall the clothes cylinder, the clothes cylinder shell, the crank bracket and the crankshaft according to the reverse steps.

9. Finally, paint all the movable parts with rosin wax.

In a word, disassembling the hand washing machine requires patience and careful operation. Only carefully cleaned and maintained washing machines can better wash clothes for us and make our life more convenient and healthy.