How to dismantle a ceiling light

Hello, I'm antique technology after-sales department of the following is about a variety of ceiling lamps detailed dismantling methods, I hope to help you

1, rectangular ceiling lamps dismantling

Rectangular ceiling lamps dismantling is relatively more troublesome. But the basic steps are almost the same, first cut off the power supply, take the lampshade, rectangular ceiling lampshade should start from his four corners, with a glass plate sucking dishwashing hooks, sucked in the side of the aluminum alloy part, slowly pull down. Note that each corner should be pulled, until the lampshade is removed; finally remove the bulb.

2, round ceiling light disassembly

Demolition of round ceiling light is the first thing to turn off the ceiling light power, only the power off to ensure that the process of disassembly is safe, and then use a screwdriver to slowly remove the lampshade of the iron ring around the three small screws, and then rotate the lampshade until it is unscrewed. Finally remove the bulb.

3, aluminum ceiling light disassembly

Demolition of aluminum ceiling light is relatively simple, first cut off the power supply, with a small screwdriver or a small thin blade from the seam edge of the aluminum buckle buckle buckle buckle up a corner, remove the lampshade, and finally pull down a small piece of aluminum buckle plate in the same way, and take out the light bulb.

4, embedded ceiling light removal

Embedded ceiling light is in the interior there is something to put it stuck, as long as a little careful can find a spring card will be stuck, so we just break it down on the line, but take before you cut off the power.

What are the precautions when dismantling the ceiling light?

1, turn off the power

Before the disassembly of the chandelier, be sure to turn off the power first, wait for about half an hour, and then carry out the disassembly of the chandelier, so as to avoid leakage of electricity, electrocution accidents.

2, good protective measures

(1) in the dismantling of the chandelier period, must do a good job of safety protection, such as wearing good protective glasses, protective clothing, etc., because the chandelier's installation location is generally relatively high, and the ceiling light also has a certain weight, if not accidentally smashed, it is very easy to have a safety accident.

(2) dismantling, but also to avoid damage to other electrical wiring, such as the removal of the kitchen chandelier, shall not destroy the kitchen flue, internal wiring, plumbing and other objects, but also shall not destroy the load-bearing structure of the ceiling.

3, save the removed objects

Take down the various parts of the chandelier, if the chandelier is completely no use, then it can be dealt with properly after the abandonment, but if there is still use, then you must remove the objects to save, so you can relatively reduce some of the renovation costs.