What equipment does the car wash shop need?

Car washing equipment price, car washing floor and floor grille cover plate molding car washing glass fiber reinforced plastic grille: glass fiber roving is laid on a large metal mold at the same time, thermosetting resin is poured, and then cold curing molding is carried out once, and the molded car washing glass fiber reinforced plastic grille is obtained after demoulding. According to the requirements, the upper surface of the molded car wash glass fiber reinforced plastic grille can be sealed with the car wash glass fiber reinforced plastic grille plate when manufacturing, forming a structure in which the lower layer is the car wash glass fiber reinforced plastic grille and the upper layer is the flat plate. Color of car-washing glass fiber reinforced plastic grille: The color of car-washing glass fiber reinforced plastic grille is made by mixing color paste compatible with resin into resin, so its color is not superficial, thus keeping the color lasting. Color glass fiber reinforced plastic grille for car washing can improve your production environment, change the gloomy situation in corrosive environment and add luster to modern factories. Application of glass fiber reinforced plastic grille in car wash: Due to the existence of corrosive liquids and gases, the metals in these areas are rapidly corroded. Although anti-corrosion coating and other measures have been taken, the corrosion of parts is still amazing, which not only causes a bad production environment, but also affects safety production, and sometimes has to stop production and repair. Using glass fiber reinforced plastic grating as structural material in these areas can play a good role. It has a series of advantages such as long service life, low cost, safety, reliability, maintenance-free, beautiful and generous. This product has been widely used in the United States for more than 30 years. At present, the production, use and sales of car wash glass fiber reinforced plastic grille have been standardized, serialized and commercialized, and a considerable number of them have been used. In the oil field reconstruction work in the Gulf region and the Middle East, experts have proved that the use of glass fiber reinforced plastic grille for car washing is the most economical and reasonable material, so it is being widely used. Double floor: There are many workshops. The traditional operation mode is that the operators, finished products, waste liquid and waste residue are located on different floors, which is inconvenient and easy to damage the anticorrosive floor. Different from the concept of solid floor, it is a double-layer car wash glass fiber reinforced plastic grille floor, that is, the upper layer is composed of car wash glass fiber reinforced plastic grille, and the lower layer is the building base. Operators walk on the car-washing glass fiber reinforced plastic grille surface, and the finished products can be placed on the car-washing glass fiber reinforced plastic grille surface, while the waste liquid and waste residue can be discharged to the lower base. After the operation, the strong water sprayer can be used to wash and remove the impurities on the ground, which is convenient for operators and managers to check. Car wash glass fiber reinforced plastic grating plank road: Chemical plants often have many plank roads, some of which are passages between equipment and some are used for patrol. These paths are generally welded with round steel. Due to corrosion, anti-corrosion coatings are often made every year. It is the best choice to make these plank roads with glass fiber reinforced plastic grille for car washing. Operation platform of glass fiber reinforced plastic grille for car washing: There are a large number of operation platforms in chemical plants, and it is reasonable to use glass fiber reinforced plastic grille for car washing as the paving material for these platforms. The glass fiber reinforced plastic grille for car washing is corrosion-resistant, does not need painting and maintenance, has a service life of up to 20 years, is light, and is 3/4 lighter than steel. When installing, there is no need to lift lifting equipment, and the supporting members can be reduced accordingly, which is more suitable for the operating platform directly supported on the equipment. It is very convenient to cut the opening of FRP grille for car washing. The arc-shaped cutting saw can easily cut the opening, meet the requirements of installing equipment, and will not cause the glass fiber reinforced plastic grille for car washing to be scattered because of the opening. For the mobile operating platform, it is more suitable to use the glass fiber reinforced plastic grille for car washing. In addition, it has certain elasticity, and people who work on it for a long time can reduce fatigue and improve work efficiency, so it is an ideal material for operating platforms. Car wash FRP grille tank top platform: The walkway and platform at the top of the storage tank are often seriously corroded, and rust is everywhere, which is daunting. There are often hidden dangers of accidents in platforms and walkways that have suffered from severe corrosion. The tank top platform made of glass fiber reinforced plastic grille for car washing can completely change this situation. Car wash equipment price, car wash floor, floor grid cover plate