Cleaning method of floor heating pipeline

The cleaning method of floor heating pipeline can use tap water, chemicals, high-pressure jet, pulsed physical waves and filters.

1, tap water

Tap water washing is the simplest and lowest cost cleaning method, but it is also the worst cleaning method among all cleaning methods.

2. Chemical reagents

The cleaning effect is obvious, but the corrosion resistance of the floor heating pipe is poor.

3. High-pressure projectile

The cleaning effect is remarkable, but this cleaning method is suitable for the pipeline that has been determined not to be blocked, otherwise it will cause serious consequences.

4. Pulsed physical waves

Cleaning is the safest and most effective warm cleaning technology at present. By using the principle of physical air pressure pulse and the physical wave formed by high-speed jet and controllable pulse, the scale on the inner wall of the pipeline and the deposits in the pipeline are impacted and vibrated by microwaves, which are peeled off layer by layer and quickly discharged out of the pipeline.

Step 5: Filter

Cleaning Clean the filter at the front end of the water separator before use every year to ensure the cleanliness of the water pipe and prevent the pipe from being blocked. First, close the inlet and reflux valve of the connecting conduit, and release the pressure by using the bleeder valve; Then open the filter screen, take it out and clean it. Check the filter for damage or blockage. If it is damaged, please replace the filter with the same specification. Install it as it is, and then press it with water.