Enterprise energy saving and emission reduction measures?

Energy saving and emission reduction are actually two classifications, one is energy saving, one is emission reduction, both are interrelated, but there is a difference.

I know from my energy saving answer it:

Enterprise energy saving, I see that you are a company in Guangdong, then it is estimated that the main energy consumption is electricity.

Then the energy saving words should start from saving electricity consumption to do.

We know that the enterprise's power consumption generally accounted for the third position in the ranking of the cost of enterprise expenditure, if you reduce the cost of electricity, reduce the electricity bill, is to reduce the cost of production, directly help enterprises to improve the competitiveness of their products!

But due to the degree of acceptance of the enterprise and the degree of knowledge related to energy saving is not enough, the enterprise is often under pressure to save energy will directly choose a way of technological transformation, and often this technological transformation due to the lack of data to support and calibrate, it will bring risks to the future results of energy saving. It is also difficult to accurately evaluate and measure the effect of energy saving.

We all know that the process of all improvements is nothing more than understanding the data, mastering the data, analyzing the data, evaluating the risk, and implementing.

Energy efficiency is no exception.

90% of companies are currently only to pay the electricity bill each month, only to know how much the month spent. There is no accurate data like the other management of the enterprise (production management, supply management, administrative management).

So 90% of enterprises in the management of power use is still in a state of blind disorganization, often with the other management of the enterprise level is extremely mismatched. As a result, although energy costs are relatively large production costs, but has become a shortcoming in the development of enterprises.

If the enterprise will use electricity and electrical energy consumption as a limited resource and production costs to pay attention to, it must be electrical energy management and production management to the same level.

Like a doctor's consultation, if we want to solve a patient's disease, we still need to first comprehensively analyze the condition and cause of the disease, in order to achieve accurate treatment. You can't treat the headache and treat the foot.

The first step for companies to start energy-saving measures is to measure and count.

1, the enterprise must establish an accurate measurement system, accurate statistics of electricity consumption.

In order to make the improvement of the enterprise more effective, you can start from the large power consumption production equipment, not easy to control and control of the production equipment is not in place to start measuring and statistics. Now there are a lot of enterprises in the realization of the importance of measurement and statistics, but the method adopted is not very scientific, often still using the more backward manual meter reading in the way. The disadvantage of manual meter reading is that the transcribed data is not complete, there is no continuity, can not accurately grasp the dynamic energy consumption curve of the equipment in the production state, such data has a certain value for the enterprise, but the value of analysis is too small. What we need is the complete, dynamic, real-time power consumption data of the production equipment, and also need to have relevant analytical aids to help us analyze and diagnose. So this first step, which is quite critical and important, is the basis for energy-saving measures.

Enterprise energy-saving measures of the second step: analysis

1, the enterprise in the measurement and statistics to the power energy use data, you need to analyze it, such as:

Whether there is direct waste of the place, off-duty hours of the equipment in accordance with the rules and regulations of the accurate operation of the switch on time?

Is too much equipment left unnecessarily idle during production?

Do employees prioritize the use of energy-efficient production equipment?

What equipment is so inefficient that it needs to be technically improved?

Is the power distribution capacity of the enterprise reasonable, and is there a wasteful situation of "big horse pulling small car"?

And so on

By grasping the details, we can analyze them accurately.

Enterprise energy-saving measures of the third step: improve

In our state of energy use of electricity to make a precise analysis of the enterprise, we can start from the following two aspects of the improvement:

1, to strengthen the management, reduce the direct waste.

According to the results of the analysis of the implementation of a perfect power management system, with objective data to allow employees to strengthen the implementation of the strength. There are many enterprises management system is relatively perfect, but there is still a lot of waste, where is the reason? In the implementation, not be able to implement the management system is just a piece of paper, no results. Therefore, if the enterprise in the implementation of management, to some monitoring aids, which can help enterprises to grasp the effect of real-time staff implementation how, and can be held accountable afterwards! There are many professional companies of the energy management system can provide perfect data measurement and statistics, as well as real-time monitoring functions. With the help of such tools, our enterprise's energy management measures, energy saving and improvement of the implementation of management measures will be better, energy saving effect will be more obvious.

2. Technological transformation.

Through the data to analyze the energy efficiency of the equipment, some energy inefficient equipment to take the appropriate technical transformation. For example, the implementation of large motor frequency conversion, servo transformation can significantly improve the production of energy efficiency of the equipment, and will soon be able to recover the investment, roughly, there are some mature technology, transformation costs are very low, the effect is very obvious measures:

Waste heat utilization of the air compressor, frequency conversion, integrated intelligent centralized control

Injection molding machine servo transformation, injection molding machines, frequency conversion transformation

Local reactive power compensation and centralized reactive power compensation for electric motors

Harmonics management

Intelligent control of central air conditioning.

The technology of technical transformation has been tested by the market and is now not a concept. Many companies focusing on energy saving from a strategic height, the introduction of technology transformation of technology, the implementation of related measures. Has brought a lot of results for the enterprise, in the case of rising labor costs, reduce production costs from the energy management and energy savings, so that the enterprise's competition is more dominant, the so-called strongest is the truth.

The above is my personal answer, I hope to be able to throw a brick to attract jade, so that more masters to participate in the answer!