Step diagram of how to cover glazed tiles

Covering method of glazed tile roof is as follows:

1, glazed tile roof adopts wood structure, and the cross-sectional area of hanging tile is 20 X 29mm, so anticorrosion treatment should be done before construction.

2. The concrete roof can be hung with battens or cement, and the size of battens is about 25 X 25mm. Roof cement slurry plane is constructed according to building codes. The smaller the plane error, the better the roof tile effect.

3. According to the shape, there will be some structures that need to be cut.

4. The maximum over-distance of cornice tile should be ≤ 10mm, and it should be pasted with 1: 1 cement slurry, but there should be gaps in the longitudinal direction. Hanging tile spacing shall be subject to the actual back size. It should not be too long or too short to affect the construction.

5. During glazed tile construction, it is forbidden to stick cement slurry on the brick surface. If any, it should be wiped off immediately to avoid affecting the decorative effect.

6, hanging tile nails and safety nails need to be fully used, especially in areas with typhoons. Stainless steel wire or copper wire can also be used instead.