How do carpenters fly falcons?

Tenoning with a woodworking tenoning machine.

The drilling method of woodworking tenoning machine is as follows:

1. When drilling through holes, if drilling through holes at one time, it is necessary to pad wood blocks under the workpiece; If the thickness of the workpiece is greater than the length of the drill bit, holes should be drilled from both sides of the workpiece;

2. When drilling a half hole, the workbench should be raised to the required height before drilling;

3. When drilling long holes, turn the longitudinal feed handwheel of the workbench and move the workbench to the required position.

4. When drilling an inclined hole, fix the workpiece with an inclined die for processing;

5. During multi-hole drilling, for the workpiece with small hole spacing, after drilling a hole, the longitudinal feed handwheel of the workbench can be rotated to make the workbench move one hole spacing to the left or right for drilling, without loosening the press to move the workpiece. For the workpiece with large hole spacing, loosen the compactor, move the workpiece to the drilling position, and then drill after clamping the workpiece.

6, drilling and milling mortise should be neat, not inclined, around the hole to level off, no wrong table, sawdust, eye mouth without stubble collapse phenomenon.