Hand-woven melon hat tutorial

Hand-woven melon hat tutorial such as:

1, first find an old dress that can be worn by children, preferably cotton knitted fabric, which absorbs sweat and breathes air. The thickness can be selected according to the clothes you choose. Generally, short and thin sleeves can be used as linings. The coat is a sweater, and the face cloth is slightly thicker. We can choose brighter colors.

2, children's clothes are relatively small, we can only take out two pieces of cloth before and after, and then remove the front pocket. Cut the cloth along the edge with scissors and save it for later use.

3. Draw the outline of the hat on the front and back of the cloth according to the pattern. You can choose the front and back at will. Draw a line with water, ink pen and the like. Then cut out the shape, remember to add a seam of about 1CM, which can be cut out directly by hand. It may not look so uniform, but it will not affect the overall production.

4. After preparing two pieces of tablecloths, prepare two pieces of interlining. Find yourself a summer T-shirt, thin, and cut out the shape. After the materials are ready, add a piece of cotton wool, which is the key to making this hat. The cutting size is 3 1 cm long and 5 cm high.

5. First put four pieces of cloth, let them face to face, sew obliquely first, make a tablecloth, and the two pieces of cloth face to face, and start sewing for a week. Let's make the lining in the same way as above. Face the fabric, don't forget to leave a back mouth. You can leave about 5cm back seams on both sides, and don't sew.

6. Start making thread cloth. Sew the opposite sides of the prepared rib cloth, leaving the seam 1cm wide, and then form a ring, facing outward, with the round edge folded in half.

7. Face the front of the hat and the front of the thread cloth along the bottom edge, and then face the middle seam. Start making the main body of the hat and put the main body into the lining. The front side is aligned with the opposite side. The bottom edge is along the one that just passed. Do it again. If the bottom edge of the lining cloth and the surface cloth can't match, you can make a slight wrinkle on the lining cloth. Escape the finished hat from behind Lin Bu.

8. Finally, finish the back of the lining and sew. When finished, put the lining cloth into the table cloth and the hat is finished. To make sure the hat is the right size, you can measure your head when threading. As long as the loop is elongated and conforms to the head circumference, it means there is no problem.