Installation method and application of wall washing lamp

It is being publicized that the city where we live is not only polluted by air, but also has a new term called light pollution. Especially at night, there are all kinds of lights, not only in shops, but also in various buildings. In fact, most of the lights we see are called wall washing lights. So what are its application fields and installation principles? Let Bian Xiao give you a detailed introduction today.

Introduction of wall washing lamp:

Wall washing lamp, as its name implies, makes the light wash the wall like water, which is mainly used for architectural decoration and lighting, and also for outlining the outline of large buildings. Because led has the characteristics of energy saving, high light efficiency, rich colors and long service life, wall washing lamps of other light sources are gradually replaced by LED wall washing lamps, and their technical parameters are generally similar to those of LED projection lamps.

Installation method of wall washing lamp:

1. First solder the LED lamp beads on the aluminum substrate with soldering iron and tin bars for later use.

2. Then try to light the welded board to see if there is any false welding or no lighting.

3. After the lighting test, apply heat-dissipating silica gel on the back of the aluminum substrate, and put the board into the shell for the next operation.

All the preparation procedures are ready. Weld the power supply to the positive and negative electrodes of the aluminum substrate, and then tie the two ends with tape? Pour glue

5. Glue-pouring wall-washing lamps must be placed evenly, and cannot be tilted or tilted.

6. Can the adhesive tape be uncovered the next day or afternoon after glue pouring? Glued glass? Then install the two plugs of the wall washing lamp.

7. Connect the wall washing lamp after installation? Is the socket interface male and female? Easy to assemble

8. After the finished lamp is finished? Can you use it? LED wall washer

Application place of wall washing lamp:

LED wall washing lamp is controlled by built-in microchip, which can be used in small engineering applications without a controller, and can realize dynamic effects such as gradual change, jumping, color flashing, random flashing and gradual change alternation, and can also realize chasing and scanning effects through DMX control. The main application places are: exterior wall lighting of single buildings and historical buildings; ? The lighting in the building is external lighting and indoor local lighting; Green landscape lighting, billboard lighting; Lighting of medical, cultural and other special facilities; Atmosphere lighting in bars, dance halls and other entertainment places.

Although this kind of wall washing lamp has good visual effect, its power is generally high, and the irradiation distance is usually within three to five meters, and it is mostly in government or commercial places. Moreover, this wall washing lamp has many color specifications, such as red, yellow, blue and even colorful. Because it is full of led tubes, it is also environmentally friendly in terms of power saving. Another advantage is that this kind of wall washing lamp dissipates heat better.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~