Solution of fishing line

It is necessary for beginners to learn how to tie the fishing line, rod and hook. This paper summarizes the connection method of fishing line. Let's have a look.

Connection method between main line and pole tip

The connection between the main line and the pole tip is mainly the combination of the outer ring and the inner ring junction, and the joint strength can reach 95%. This knot can form a fixed ring at the end of the fishing line, and then it can be connected with other fishing tackle, which can be well used at the end of the main line of throwing rod.

1, steel wire loop method

2. Connection method between trunk line and pole tip

Connection method of main line and 8-shaped ring

The connection between the main line and the 8-shaped ring is shown in the figure below. This connection method has the highest nodule strength and is often selected by competitive fishermen in recent years, and its tensile strength is also the best. After the main line is used several times, both ends of the line can be cut short before use, so that the fatigue of using the line will not be caused by repeated operation.

Connection method of sub-line and 8-shaped ring

There are usually two ways to connect the sub-line and the eight-character ring. Is the tension of the first method stronger than that of the second method, but the verticality of the tied sub-line and the main line is not ideal? The strength of the second kind of nodules can reach 90%, but the smoothness should be paid attention to when knotting to avoid fishing line accumulation after knotting.

Connecting method of fishing line and hook

Here, I'd like to share the common double-hook system with fishing friends. Let's first measure several root threads with the same length with the sub-thread, then make a single hook as shown in the figure, and then make a second hook, with the thin thread winding 7/8 times and the thick thread winding 9- 12 times. When tying the thin thread hook, the stressed thread and the thread end should be tightened, and pay attention to the place where the thread knot is tightened. It should not be next to the hook cap, but it is better to have a little distance. When the thick thread is hooked, the stress line and the tail line should be tightened to avoid unhooking.

Fishing line connecting method and fishing line

When fishing, few people will directly connect the fishing line with the fishing line, and most of them will use some connectors, such as the common 8-shaped ring and quick pin. But if the fishing line can be directly connected with the fishing line, it is also beneficial to go out fishing.

1, this connection method is recognized as a good connection method, and its nodule strength can reach about 95%.

2. Compared with the above-mentioned knotting method, this knotting method is much simpler and has high knotting strength, but the two ends of the knot are slightly bent and cannot be kept in a straight line.

The above is a summary of the fishing line connection mode in this paper. From this article, we can see that there are many ways to connect fishing lines, whether they are connected by connectors, hooks or fishing lines, they all have their own connection methods and skills, and they all have their own functions in fishing. I hope this article can better help future fishing friends.