How to connect the fishing rod and fishing line?

The connection methods of fishing rod and fishing line include hook fishing line connection, valve core connection, rubber band connection and so on. Details are as follows:

1, hook line connection method.

First of all, the end of the fishing line should be tied with a strong knot to make it a coil, and the tied coil cannot be changed in size. Then put your thumb and forefinger into the coil. You need to press a section of fishing line with your thumb and forefinger respectively, and then tie it in the original direction. After tightening the fishing line, it becomes a slipknot. Then put the tip of the pole in the slipknot.

In this way, the hook can be tied to the top of the pole. After the fishing line is tightened, tie the hook tightly to the knot at the tip of the pole, so that the fishing line can be connected to the top of the pole. In the final winding process, just loosen the hook and take it off the wire wound on the foam board.

2. Valve core connection mode.

This method needs to tie a knot at the head of the soft belt on the pole tip, then wind the soft belt into a semi-circular arc, then wind a section of valve core on the soft belt, then pass the fishing line through the semi-circular arc of the soft belt, and then tie the fishing line into a knot.

The advantage of this binding method is that it is convenient to take the wire, and it is only necessary to remove the valve core wrapped on the soft tape afterwards. When you take the fishing line, you just need to take the valve core off the soft belt.

3. Rubber band connection method.

First of all, the rubber band needs to be placed in the main position of the pole, but it needs to be used reasonably according to the length of the line in front of the pole tip. If you need to extend the line a little, you need to put a rubber band around the first few sections of the fishing rod. But if you need to shorten the line a little, you should put the line in the last few sections of the fishing rod.

In the process of sheath, it must be wound several times, which is beneficial to fix the sheath rod and prevent it from moving forward. It is best to put a valve core or rubber cap on the fishing line first, then tie a connecting ring at the end of the fishing line, and finally connect the connecting ring to the rubber band.

Precautions for fishing:

1, temperature.

When the temperature is relatively high, it is best not to fish, because the temperature is too high and the air pressure is low, which will make the fish depressed, unwilling to eat, not very lively and unwilling to come out for activities, so the weather is fine and the lake is relatively calm, so it is best not to fish at this time.

2. When the weather is foggy.

Don't fish except when the temperature is high, and don't fish when there is fog, because the air pressure is very low when there is fog, so the air pressure is low. Low air pressure will make fish feel depressed, and they don't want to eat or come out for activities, so the weather is fine and the lake is calm. It is best not to fish at this time.