Green brick wrapped red brick wall construction method

1, first stack the green bricks and red bricks separately, clean up the wall construction area and make sure the foundation is level.

2, lay a layer of cement mortar on the ground as the foundation.

3, apply a layer of mortar on the foundation, use a trowel or mortar knife to spread the mortar evenly on the foundation, the thickness is about 2-3 cm.

4.Wet the green bricks and lay them flat on the mortar in order, starting from one side. Use a level and a ruler to make sure the green bricks are level and plumb.

5, leave a certain gap above the green bricks, and then lay the red bricks in the gap in turn, using a level and ruler to ensure that the red bricks are horizontal and vertical.

6, fill the brick joints with mortar, use a mortar knife to evenly fill the brick joints with mortar, and use a scraper to smooth out any excess mortar.

7, wait for the mortar to dry, use a brush to clean the mortar residue on the wall, and use a trowel to trim the wall to make it level.