How to install and wire Yuba lamp

I think after a day's work, what everyone wants to do most when they get home is to take a hot bath. Therefore, the bathroom is indispensable to our family. The equipment we often use when taking a bath is the heater and the exhaust fan, which involves the Yuba switch. Yuba lamp is often used by us, and some faults will inevitably occur, but it is not convenient to find an electrician to solve it at the moment, which requires us to know some common sense of wiring and installation. Today, Bian Xiao will take you to study.

Connection method of Yuba lamp switch

Yuba switch wiring has three power cords:

1. ground wire, the yellow and green one, is on the socket above the bathroom and connected to the shell of Yuba. The neutral wire, which is blue or black in most cases, is connected with the turnbuckles of five lamp holders on the left side of the socket under the bathroom. The live wire, which is red in most cases, is located at the lower right of the socket and connected to the terminals of the three switches.

2. Three switches, one for lighting and the other connected to the central connecting post of the lighting head; Two lamp heating switches, and the other terminal of each switch is connected with the central terminal of two heating lamp holders. The Yuba terminal marked with N is connected to 0, and the other four terminals have two warm lights, one for ventilation and one for lighting. These four terminals are connected to the switch control button, and the other terminal is connected to the switch. It should be noted that the color of the wire should be made clear. The position of Yuba's pressure line. According to the wiring diagram above, the control switch L 1 with wire color control was connected to the socket L when it was bought. Connect the live wire directly to the socket, the other hole of the socket is connected to zero, and the other end of the switch is connected to the lamp.

Installation method of Yuba lamp switch

1. First, choose a good location and choose a convenient location for installation. Switches are usually installed on the ground with a height of 135cm. The bathroom is a relatively watery space, and the Yuba switch is best installed at this height. The height of 135 cm is safe and convenient for users to operate. Generally speaking, the Yuba switch has three switches, two for controlling heating and one for controlling lighting.

2. In fact, it is impossible to ensure the correct wiring only from the outside, otherwise it will burn out the wiring. It needs to be opened. It should be noted here that some brands of Yuba need to turn off the lights before taking them apart. The installation position of Yuba switch is a headache. When installed in the bathroom, I am worried that the switch will have an accident due to leakage. Moreover, Yuba is a high-power electrical appliance with several functions. If the switch wiring is not good, it is easy to cause leakage or burn the Yuba. Installed outdoors, it is not very convenient to switch the Yuba when taking a shower.

The above is the Yuba switch that Bian Xiao introduced to you. Bian Xiao introduced the wiring mode and installation mode of Yuba light switch, which are different. Everyone should distinguish clearly. In addition, Bian Xiao also wants to tell you that when we use the Yuba switch, we will definitely encounter some problems. These problems are inevitable. Don't panic when you encounter these problems. You just need to know more about the wiring and installation of Yuba switch. Ok, that's all for Bian Xiao's introduction.